sweetbeats
Reel deep thoughts...
Okay. You’re welcome. Good luck.
I still recommend, as a troubleshooting step, to pull the fuse for the +6V rail, and jumper the K-102 relay signal contacts on the r/p amp cards. This completely takes the mute timing circuit out of the picture and bypasses the muting relays. You’ll have thump on power up and power down so you have to be prepared for that.
And, yeah, when you posted you still had other equipment in the signal chain (your noise reduction unit), I was like (to myself) that would have been good to know. When you have a device that’s misbehaving, step one is to isolate the device as a measure of starting to sort out if the problem is related to the device itself, one or more other devices, or the interconnections between those devices. So keep that in mind when you are trying to resolve a problem or working with others in that effort.
I still recommend, as a troubleshooting step, to pull the fuse for the +6V rail, and jumper the K-102 relay signal contacts on the r/p amp cards. This completely takes the mute timing circuit out of the picture and bypasses the muting relays. You’ll have thump on power up and power down so you have to be prepared for that.
And, yeah, when you posted you still had other equipment in the signal chain (your noise reduction unit), I was like (to myself) that would have been good to know. When you have a device that’s misbehaving, step one is to isolate the device as a measure of starting to sort out if the problem is related to the device itself, one or more other devices, or the interconnections between those devices. So keep that in mind when you are trying to resolve a problem or working with others in that effort.
