riotshield
New member
I was curious if doing any of the following will damage your pre-amp or condenser mic while the mic is plugged in:
- Turning the pre-amp on/off while phantom power is set to 'on'
- Switching the gain stage on the pre-amp while it is on
- Switching the pad or low-cut filter on or off, either on the mic or on the pre
Thanks
- Turning the pre-amp on/off while phantom power is set to 'on'
- Switching the gain stage on the pre-amp while it is on
- Switching the pad or low-cut filter on or off, either on the mic or on the pre
Thanks