Microlynx ATR124 No record!

[glava]

I have two ATR124's and a Microlynx controlling them and my DAW
everything work as it should besides I can't Record Arm the ATR's thru the Microlynx remote.
Tried with my backup ML system same problem.
I'm using factory made Timeline cables
and the Microlynx has a specific transport ATR124 setting
so their should be no problem.

Anyone have a clue where to start?

I have a LYNX II somewhere that I will try and see if it's the same problem
but probably as they are from the same company.

 

[noah330]

What are you using for a DAW?

 

[glava]

I'm using Protools but that has nothing to do with it.
Same problem when just controlling one of the ATR's

 

[sweetbeats]

I saw your past on the Ampex Mailing List about this…are you saying you can’t arm/disarm individual tracks with the MicroLynx, or the transports won’t enter REC mode via the MicroLynx? Hopefully you’ll get some response on the Ampex List. You may very well, actually very likely, are the only person on this planet operating a pair of ATR-124s in a sync array.

 

[glava]

I saw your past on the Ampex Mailing List about this…are you saying you can’t arm/disarm individual tracks with the MicroLynx, or the transports won’t enter REC mode via the MicroLynx? Hopefully you’ll get some response on the Ampex List. You may very well, actually very likely, are the only person on this planet operating a pair of ATR-124s in a sync array.

Haha yes I'm probably one of the few Yes entering Rec mode thru the Microlynx.