Where/when can we see it?
As soon as I see the light at the end of the "honey do" list.
Then I can get back to it. First things first though. I'm in the "process" of building 2 custom computers to finish up my console. EXPENSIVE SHIT though
Like the Graphics computer motheboard and Graphics cards...
holy moly..
motherboard: EVGA SR-2
http://www.evga.com/articles/00537/ $$$$$
2 Qudro graphics cards. $$$$$$$$$$$$$$$
http://www.nvidia.com/page/quadrofx.html
The reason for this is called Folding. I'm going to try and help in this endeavor.
There is a community that uses home computers(and university mainframes) to unlock the secret of how proteins fold, to discover a cure for cancer.
http://www.overclock.net/overclock-net-folding-home-team/370859-nitteos-f-h-gpu2-farm.html
Hence the need for heavy duty graphics processors. Although, my planned system is a drop in the bucket compared to some of these guys..OMG..unfuckingbelievable
Makes audio computer stuff look like a joke.
And theres litterally hundreds of these out there doing this work.
Heres whats known as a "Farm"..this is a personal Folding server setup.
Each one has 3 of these GPU's. Seriously BIG BUCKS!!
As to the audio computer...well, that one's easy compared to the graphics one. I already have most of the stuff. Just need a good interface. I have a M-Audio 1010Lt at the moment, which is probably good enough for me, but I'd sure like to get a RME Hammerfall Fireface 800
But thats down the road apiece...WAY down the road.
I have to pawn my soul just for the graphics stuff.
And thats not even considering the Raid system either....GAK!! 2 Terrabites worth. $$$$$$$$$
Oh well...its already taken 20yrs..whats another one or two to get the computer audio shit. Ha!!
But, after I get the honeydo's(finish my bathroom) done and the computers built..maybe I can get back to the acoustics stuff.
THEN..I'll let you know.
Actually, I'm getting ready to mill out the pieces for the rear wall Defractal diffuser this weekend. Already have the material. It gets machined like this..although mine are a wee bit smaller.
Here is the profile of one well bottom.
Here is 2x6 face being machined on a shaper with a one pass knife profile. These knives probably cost as much as my whole diffuser
Finished face after shaping
Here they are being assembled into ONE unit. Usually, a Defractal will have 6 of these in one complete assembly. And there may be more than one assembly in a complete diffuser, depending on available space. Mine will have one complete diffuser of 6 units.
Final sanding for insertion of end divider panels.
Heres what mine will look like when finished. You've probably already seen this, but what the heck.
Ok, enough of my bla bla bla.
fitZ
