H
hoarang
New member
hello everybody,
this is my first post on the forum, so i firstly want to give thanks to everyone because it has been a great source of information until this time.
I had my hand 1 year ago on a tascam m600, whitch was not working at the time because of a problem with the master trim knob on the master section.
meanwhile waiting for the part, i cleaned all inside with compressor / vacum cleaner, changed the condensor of the power supply unit, and to try to read all i could about this desk, and i can say i came accross some detail posts that enlighten me a bit, even i was far to understand everything, as i am a novice in electronics.
when i recieved the master track i plugged it ,and was surprised not to have any sound there, it took me a while to realise that there was some "bridge" green cards missing , the ones whitch connects the four tracks composing the master section.
i finally got my hands on those little cards, that i plugged with a big smile
but still…no sound coming out, exept for the tone test function, whitch tell me that the master out is correctly working..
i also have some signal coming in the tracks, mic or line, but nothing coming out to the master section, speaker or headphones…
i don't what i am missing here, i guess it could be a lot of things, but i hope somebody reading my post would have a little light for me !
i am really dying to ear this desk running, yet it is good to get it back to function step by step…it has been sleeping only for a year or so before i got it, but was not so well kept…
hope to find some help !
thanks
francois.
this is my first post on the forum, so i firstly want to give thanks to everyone because it has been a great source of information until this time.
I had my hand 1 year ago on a tascam m600, whitch was not working at the time because of a problem with the master trim knob on the master section.
meanwhile waiting for the part, i cleaned all inside with compressor / vacum cleaner, changed the condensor of the power supply unit, and to try to read all i could about this desk, and i can say i came accross some detail posts that enlighten me a bit, even i was far to understand everything, as i am a novice in electronics.
when i recieved the master track i plugged it ,and was surprised not to have any sound there, it took me a while to realise that there was some "bridge" green cards missing , the ones whitch connects the four tracks composing the master section.
i finally got my hands on those little cards, that i plugged with a big smile
but still…no sound coming out, exept for the tone test function, whitch tell me that the master out is correctly working..i also have some signal coming in the tracks, mic or line, but nothing coming out to the master section, speaker or headphones…
i don't what i am missing here, i guess it could be a lot of things, but i hope somebody reading my post would have a little light for me !
i am really dying to ear this desk running, yet it is good to get it back to function step by step…it has been sleeping only for a year or so before i got it, but was not so well kept…
hope to find some help !
thanks
francois.
