Suddenly Lost Stereo Buss Monitoring On The 388

[Mark7]

I guess they are passing signal to PGM 2 because I can see the needle move on the meter each time. What's not happening is the signal then being passed to the monitor section from either the buss or the track.

Also, are you referring to this?

So, this morning I connected a mic to channel 2, did the usual things, pushed both buss faders into the unity zone and then put tracks 1 and 2 in rec ready mode with the respective monitor controls at the same level for each track (around 3 O'Clock). I then swept the pan from left to right and it definitely lost volume (practically inaudible) when panned fully right (track 2). I then proceeded to swap buss 2/track 2 out for busses/tracks 4, 6 and 8 with the same monitor gain setting on each. No loss of volume at all. For completeness' sake I did the same with 3, 5 and 7. No probs

Because I only did that from channel 2. Today I used all 8 channels.