Question about phase reversal...

  • Thread starter Thread starter jrhager84
  • Start date Start date
J

jrhager84

expert newb
My Firestudio and Digimax don't have any phase reversal switches (which kind of upsets me). I'd like to test phase on all of my channels, so my question is this:

In Cubase, in the mixer window, there's an option to flip phase on each channel. If I flip phase in monitoring mode, will it record with an inverted phase, or is it just phase delaying it? Thanks in advance,

-Joel
 
Phase reversal in cubase

It wont put the phase reversal into your mix if it is through monitors , you should have a software effect somewhere in there that will deal with the phase which you can run through a send or directly onto the channel. Im not sure with cubase though , Im unfamiliar with it , but I know in Sonar 6 there is a phase effect.

Neil
Plenty Of Rope / The Little Studio
 
In cubase, every channel strip has a phase reversal button on it. It looks like a zero with a line through it, and if you hover over it, it says something like "input phase"
 
Im so horrible at asking questions lol. I know of the button, and im asking if it does the same thing as if the firestudio had it. Is it the same as flipping the pins, or is it just a simulator? Thanks dudes...
 
No, it is not the same, but the effect will be the same, as far as your mix is concerned....
 
Actually, in a mathematical sense it IS the same. In fact, in both cases, you're not really playing with the phase, but you're reversing polarity. When you switch pins 2 and 3 around, you swith the positive and negative terminals on the analog cable. This results in reporducing the wave that's the exact opposite of what would be recorded with "normal" connections, i.e. if you graph the resulting waveforms of "normal" polarity and reversed polarity outputs, they will look like mirror images.

The same exact thing happens with the "phase" switch in Cubase. All it does is flip the polarity of the waveform, i.e it does NOT delay the signal which is indeed what phase related tools would do.

Furthermore, engaging the polarity reversal switch in Cubase's mixer and performing the phase reverse process in Audio->Process, will yield the same exact result. I mention this, because it may potentially be less CPU heavy to do it this way, instead of at the mixer level.
 
noisewreck said:
Actually, in a mathematical sense it IS the same. In fact, in both cases, you're not really playing with the phase, but you're reversing polarity. When you switch pins 2 and 3 around, you swith the positive and negative terminals on the analog cable. This results in reporducing the wave that's the exact opposite of what would be recorded with "normal" connections, i.e. if you graph the resulting waveforms of "normal" polarity and reversed polarity outputs, they will look like mirror images.

The same exact thing happens with the "phase" switch in Cubase. All it does is flip the polarity of the waveform, i.e it does NOT delay the signal which is indeed what phase related tools would do.

Furthermore, engaging the polarity reversal switch in Cubase's mixer and performing the phase reverse process in Audio->Process, will yield the same exact result. I mention this, because it may potentially be less CPU heavy to do it this way, instead of at the mixer level.
Click to expand...

100% correct, listen to this guy. Please get out of the habit of saying "phase" reversal. It's polarity reversal, but manufacturers know that most people say phase, so rather than to confuse the majority of their customers, they purposely mis label it.

On a side note, playing with polarity reversal is fun! Pick a song, play it in mono with the polarity reversed on one of the channels. Anything center panned will get canceled out, leaving only the artificial reverb trails (or any other effects applied to it that were in stereo).
 
Now is that polarity reversal done BEFORE record if it is engaged, or is it something you do AFTER you record. I'd like to do the "gold standard" phase check with all of my mics to get my kit sounding good.
 
IronFlippy said:
100% correct, listen to this guy. Please get out of the habit of saying "phase" reversal. It's polarity reversal, but manufacturers know that most people say phase, so rather than to confuse the majority of their customers, they purposely mis label it.

On a side note, playing with polarity reversal is fun! Pick a song, play it in mono with the polarity reversed on one of the channels. Anything center panned will get canceled out, leaving only the artificial reverb trails (or any other effects applied to it that were in stereo).
Click to expand...

Dude, that's freakin' awesome... It's so entertaining!
 
Now is that polarity reversal done BEFORE record if it is engaged, or is it something you do AFTER you record. I'd like to do the "gold standard" phase check with all of my mics to get my kit sounding good.
Click to expand...

if you're using a software phase reversal, it doesn't matter when you apply it - just like with using a plugin or something, it doesn't change the properties of the waveform that's being recorded - it changes its properties for playback. you can track with the phase flipped, or engage the phase reverse while mixing - either way, it has no effect on the actual .wav file.

if you were using a phase reversal on a preamp/console, then you'd probably want to do so before you track, so that the waveforms are physically recorded with their polarities flipped. of course they can be flipped back again later by using the software phase reversal if need be.
 
So what you're saying is it won't flip on-the-fly? I want to test phase, but if it only applies under AFTER recording, it doesn't help me much...
 
MadAudio said:
Yes, the polarity reversal is on playback, not record.
Click to expand...

Not if it's on the mic or preamp, as was asked in the OP. Then it certainly is applied during record. And I won't get started on my opinion about it not being phase reversal. I'll just agree that it is not phase delay.
 
Robert D said:
Not if it's on the mic or preamp, as was asked in the OP. Then it certainly is applied during record. And I won't get started on my opinion about it not being phase reversal. I'll just agree that it is not phase delay.
Click to expand...

Yeah, but we're talking about the software. He already said his hardware has no "phase" button. The question was related to Cubase.
 
jrhager84 said:
So what you're saying is it won't flip on-the-fly? I want to test phase, but if it only applies under AFTER recording, it doesn't help me much...
Click to expand...
If you happen to be doing input monitoring through the app (Q-base) you could.


I figure the reason 'Phase stuck; a) It's easy to say, b) The symbol fits on little buttons.
 
Well, I'm horrible at getting my point across, so I'll do my best right now:

If I use Cubase to monitor levels in the mixer window of Cubase, If I hit the snare repeatedly and push the phase button (with monitor button highlighted ONLY, not record) would it reverse the polarity of the signal coming in? Or do I have to actually record a sound to be able to reverse it....if so that's gonna make my life a PITA....
 
jrhager84 said:
Well, I'm horrible at getting my point across, so I'll do my best right now:

If I use Cubase to monitor levels in the mixer window of Cubase, If I hit the snare repeatedly and push the phase button (with monitor button highlighted ONLY, not record) would it reverse the polarity of the signal coming in? Or do I have to actually record a sound to be able to reverse it....if so that's gonna make my life a PITA....
Click to expand...

MadAudio said:
Yes, the polarity reversal is on playback, not record.
Click to expand...

I think I already answered this.... :p ;) :D
 
You must log in or register to reply here.
Back
Top