Hey Myriad, looking good man! Doesn't it feel good to finally accomplish something? Just finished the aluminum bezels for my two computers last night myself. Learned a new trick too!
Ok, as to your question. If you look at the skp. file I sent you, zoom in under the top, and look at the front rail. You'll see something important. I've built 2 wood consoles, and after loading them with equipment, the front edge ALWAYS sagged. The second even had a 2x3 wood rail. Now, I don't know what you've come up with for a final design, or the equipment that will be on/in but my open span was more than 80" for my original design. So, I finally got a piece of 1 1/2"x1 1/2"x 1/8" steel angle, drilled holes along each flange for screws, and fastened it in place. That did the trick. Or, if your span isn't very long, you can simply use 3/4"x3/4" hardwood cleats. Either full length or just a few pieces. This way the screws are hidden undernieth. Or you can use Liquid Nails or such.
fitZ
Looks great though.