L
lunatic
Member
I'm selling a MOTU 828mkII in perfect condition. I love this unit and think it sounds great. The only reason I am selling is this. I just got a great opportunity to intern at Immersive Studio in Boulder, CO (http://www.immersiveworld.com). Of course, they are a ProTools shop and while they said they would not require me to have some sort of PT system at home, they strongly recommended it. It only makes sense so I am selling the MOTU to fund the purchase of a 002r.
Price is $600 and buyer pays shipping. Paypal is okay but I ask that the buyer split the 3% fee with me. The MOTU will be available September 1st... maybe even sooner. I just need to finish up a project.
Interested parties may contact me by posting to this thread, PM, or sending an e-mail to brad@evergroove DOT com.
Pictures and detailed information can be found here: http://www.motu.com/english/motuaudio/828/body.html
The following feature were taken from the MOTU site:
* CueMix DSP™ near-zero monitoring system.
* Front-panel control - access your entire mix, or any 828mkII setting, directly from the front panel.
* Stand-alone operation - program your mixes at the studio and then bring the 828mkII to your gig - no computer needed. Need to tweak the mix? Do it on site using the back-lit LCD and front-panel controls.
* Multiple CueMix DSP mixes - create different monitor mixes for the main outs and headphones. Add send/return loops for outboard gear - with no latency.
* Two mic pre-amps with switchable 48-volt phantom power, front-panel trim controls and pre-amplified sends.
* Mic/guitar instrument sends - add your favorite outboard EQ, preamp, reverb or other processor to the two mic/guitar inputs, before the signal goes digital.
* 20 inputs / 22 outputs - there's no channel sharing in the 828mkII; the mic inputs, S/PDIF I/O, headphone out and main outs are all handled as separate channels.
* 8 channels of 24-bit ADAT optical input/output. Eight channels at 44.1/48kHz. Four channels at 88.2/96kHz.
* Sample-accurate digital transfers between ADAT digital tape decks and the computer via the ADAT sync port.
* Sample-accurate MIDI - connect a MIDI controller and/or sound module with no separate interface needed. MIDI I/O is sample-accurate with supporting software.
* Expandable - add additional 828, 828mkII or 896 FireWire interfaces for additional I/O.
* Eight 24-bit 96kHz analog inputs and outputs on balanced/unbalanced 1/4" TRS jacks
* Separate TRS main outs and front-panel headphone jack, each with independent volume control.
* Stereo 24-bit 96kHz S/PDIF in/out
* Word clock in and out
* SMPTE in and out
* Includes drivers for Mac & PC, including ASIO, WDM, Wave, GSIF, Core Audio, and Core MIDI. Supports all popular Macintosh and Windows audio software.
* 100% compatible with all host-based effects processing in today's popular audio programs.
* Includes AudioDesk full-featured sample-accurate workstation software for the Macintosh with recording, editing, mixing, real-time 32-bit effects processing & sample-accurate sync.
* Two FireWire ports for daisy-chaining without a hub
* Front panel volume control for main outputs.
* Front panel headphone jack with independent volume control.
* Front panel meters for all analog and digital I/O, plus SMPTE sync tach and lock LEDs.
* Dedicated front panel clock status LEDs.
Price is $600 and buyer pays shipping. Paypal is okay but I ask that the buyer split the 3% fee with me. The MOTU will be available September 1st... maybe even sooner. I just need to finish up a project.
Interested parties may contact me by posting to this thread, PM, or sending an e-mail to brad@evergroove DOT com.
Pictures and detailed information can be found here: http://www.motu.com/english/motuaudio/828/body.html
The following feature were taken from the MOTU site:
* CueMix DSP™ near-zero monitoring system.
* Front-panel control - access your entire mix, or any 828mkII setting, directly from the front panel.
* Stand-alone operation - program your mixes at the studio and then bring the 828mkII to your gig - no computer needed. Need to tweak the mix? Do it on site using the back-lit LCD and front-panel controls.
* Multiple CueMix DSP mixes - create different monitor mixes for the main outs and headphones. Add send/return loops for outboard gear - with no latency.
* Two mic pre-amps with switchable 48-volt phantom power, front-panel trim controls and pre-amplified sends.
* Mic/guitar instrument sends - add your favorite outboard EQ, preamp, reverb or other processor to the two mic/guitar inputs, before the signal goes digital.
* 20 inputs / 22 outputs - there's no channel sharing in the 828mkII; the mic inputs, S/PDIF I/O, headphone out and main outs are all handled as separate channels.
* 8 channels of 24-bit ADAT optical input/output. Eight channels at 44.1/48kHz. Four channels at 88.2/96kHz.
* Sample-accurate digital transfers between ADAT digital tape decks and the computer via the ADAT sync port.
* Sample-accurate MIDI - connect a MIDI controller and/or sound module with no separate interface needed. MIDI I/O is sample-accurate with supporting software.
* Expandable - add additional 828, 828mkII or 896 FireWire interfaces for additional I/O.
* Eight 24-bit 96kHz analog inputs and outputs on balanced/unbalanced 1/4" TRS jacks
* Separate TRS main outs and front-panel headphone jack, each with independent volume control.
* Stereo 24-bit 96kHz S/PDIF in/out
* Word clock in and out
* SMPTE in and out
* Includes drivers for Mac & PC, including ASIO, WDM, Wave, GSIF, Core Audio, and Core MIDI. Supports all popular Macintosh and Windows audio software.
* 100% compatible with all host-based effects processing in today's popular audio programs.
* Includes AudioDesk full-featured sample-accurate workstation software for the Macintosh with recording, editing, mixing, real-time 32-bit effects processing & sample-accurate sync.
* Two FireWire ports for daisy-chaining without a hub
* Front panel volume control for main outputs.
* Front panel headphone jack with independent volume control.
* Front panel meters for all analog and digital I/O, plus SMPTE sync tach and lock LEDs.
* Dedicated front panel clock status LEDs.