E-mu Proteus X2

  • Thread starter Thread starter misscc803
  • Start date Start date
misscc803

misscc803

Tech Support Specialist
Do you have to have an Emu soundcard in order to use Emu Proteus X2 or is the MIDI interface included all I need? I already have a soundcard(tascam us-122) installed so will that work with the Proteus X2 to allow audio playback?

Thanks in advance.

Nicole
 
Nicole, since the X2 is a software synth it can output its sounds to whatever sound card is in your system; however, a slower system may have more latency (delay between you hitting a key and hearing it come out the speakers) than you can stand for playing real-time.

The x2 prefers to use ASIO drivers but can apparently use the Microsoft Directsound driver - I'm not sure if that's on the CD-Rom that comes with X2 or not, but you should be able to find it at the Microsoft site.

The included MIDI interface will let you plug a keyboard controller into your computer to play the sounds from X2 - if your keyboard also has sound generators inside, you could also hook the output of that keyboard into a mixer (along with your computer's sound card output) and get BOTH sounds to play thru speakers/amplifier connected to the mixer.

Here's the quick start

http://www.emu.com/support/files/storage/PX2_Quick_Start.pdf

and full manual

http://www.emu.com/support/files/storage/Proteus_X2_(EN).pdf

for the X2 - check out page 10 of the quick start for more on your question, but remember - Emu wants to sell you a sound card, so they don't wanna tell you you can use someone else's sound card; they just don't tell you you CAN'T.

HTH... Steve
 
Yeah i just found out that the included MIDI interface will allow me to use X2 without a EMU soundcard. One of the reps from EMU told me my Tascam US-122 would work fine with it.

Thanks for responding to my question though.

Nicole
 
Back
Top