A
ap
Member
The bank select for JV-1010 requires a controller number 0 message(MSB) followed by a number 32(LSB) message.
Instructions for the FATAR StudioLogic 161 controller are extremely vague. It seems to say: 1) enter edit mode and select Bank Select, 2) input the LSB number, 3) then hit the -/H key to designate it as the controller 32 message, 4)input the MSB number 5) exit edit mode.
Does this sound right? I know this sounds complicated but I'm hoping I have a common setup or at least this is a standard protocol.
I'm having no luck with my keyboard, but I've setup all the bank select commands in Logic and it works perfectly.
Instructions for the FATAR StudioLogic 161 controller are extremely vague. It seems to say: 1) enter edit mode and select Bank Select, 2) input the LSB number, 3) then hit the -/H key to designate it as the controller 32 message, 4)input the MSB number 5) exit edit mode.
Does this sound right? I know this sounds complicated but I'm hoping I have a common setup or at least this is a standard protocol.
I'm having no luck with my keyboard, but I've setup all the bank select commands in Logic and it works perfectly.