tascam US 122 Recording Problem Help?

[thegermnyc]

hello everyone hope i can get some help here.

I have A tascam US-122 i would like to be able to record my dj mix sets right into wavelab.

I use a Pioneer DJM3000 mixer which i hook my fostex Pm speakers into the XLR masters.

I have 2 turntables taking up 2 channels of the djm 3000, and i have rca running from the line out to the back of the tascam so i can hear my productions on the computer. So basically im using my dj mixer as a mixing board for sound.

I need to be able to record my live sets into wave lab. Please is can anyone help me with this problem?

I also have a free channel on my mixer free if that helps any, and booth monitors and SEND RETURN R L..

thanks u can email me also if u like

THEGERMNYC@AOL.COM

once again thanks if u can help!

 

[scrubs]

I'm not sure where the problem is. The Tascam is a 2-channel interface. It sounds like you just need to run the main l/r outs from your mixer into the l/r inputs on the tascam, or run a line out from each of your turntables to the l/r ins on the tascam. I'm not familiar with wavelab, but you'll need to configure the tascam as the input recording device and make sure you have the proper drivers installed.