TASCAM Fe8 On Protools

[JPGM]

I use the Protools 7.3.1 + digi002R + tascam FW1884 + 2x tascamFE8 on XP.

when adjusting send levels in the track on the FE-8, the rotary encoders will not work!!!

in the FW1884, the rotary encoders work, but on the FE8 (2) not work....

I need help

 

[MessianicDreams]

I use the Protools 7.3.1 + digi002R + tascam FW1884 + 2x tascamFE8 on XP.

when adjusting send levels in the track on the FE-8, the rotary encoders will not work!!!

in the FW1884, the rotary encoders work, but on the FE8 (2) not work....

I need help

Do the rotary encoders work for anything else?

 

[dementedchord]

do they work when doing panning???

 

[JPGM]

Yes, they work when doing panning.... but not control the SEND.

the rotary encoders not work in 2 FE8 with protools to control sends. Just control the PAN, The sends 1,2,3,4,5,6 not control.

The rotary encoders on the TASCAM FW1884 work ok and control the PAN and SENDs. The expanders TASCAM FE8 not control the SEND, and when I select the AUX1, 2,3,4 on TASCAM FW1884, which correspond to SEND 1,2,3,4, the control of SEND go to the faders, but only in the FW1884 faders. The faders of FE8 are stubbornly to control the volume of the track and also do not control the SEND!!

 

[dementedchord]

well i guess i'm glad i didnt buy the expanders after all... i think i would ask someone at frontier ssince they did the design for tascam...


http://www.frontierdesign.com/

if they cant help pm me and i'll look for the e mail addy of a guy in australia thats supposed to be the guy... i know i've got it here somewhere...