I've been messing around with tracking/mixing the drums. I'm curious how you guys setup your Drum Bus when mixing. At first I was sending the Main Outputs of all the drum tracks to a Stereo Aux. However, I've recently been sending all the drum tracks to the Stereo Aux track via the Sends...leaving each drum track's output to "MON L/R." I activate the FMP feature on each track's send to keep the pan settings on the bus (I hard pan my two overheads left and right 100% and usually leave the close mic'd snare and kick in the center). So instead of just having the drums playing thru the bus the original tracks are also being heard. Is this how a drum buss is usually done? Thanks.