MadAudio
Damned if I do
Wow, what a charming mouth he has! I'm sure he would be a great friend for Jake or Ed.
- Status
Dr ZEE
Anti-Pro Circles Insider
evm1024
New member
B
Beck
Guest
As for how far back this thing goes...
A highly respected and well-liked, long-time member sent me a PM in June of 2005. Below are excerpts, but I will not post the PM in full or reveal the sender's name because that would be violating a confidence. That's up the the member if they want to be involved or even care about this current issue.
“I am now being trolled, harassed, stalked and threatened by "Micsales", aka "acorec" (banned user name).
“Not only do I ask for your support as a friend, but the trolling/harassment and threats are escalating dramatically, on posts AND PM's, of me by ‘Micsales’.”
It is my impression that as far is this person is concerned it is water under the bridge and he does not wish to reopen it. But as for me, it serves as a starting point in a pattern that goes back over two years spanning different user IDs. How long do you propose we tolerate it, Tim G?
After Micsales was banned, then came “Quantagee” who was also banned. I’m certain there were others (some I suspect yet can’t be completely sure so I don’t list them), but we now have this same troll under the name of MCI2424.
In October 2005 I received this information from the same member via PM:
“MCI2424 is acorec”
But one doesn’t have to have received PMs or be an expert in writing analysis to see for themselves the same language, the same attacks, the same arguments, the same attitude and trolling behavior. But an admission by MCI2424 that he is acorec (Andy Olaska) makes any observations insignificant.
I have always considered the possibility that MCI2424 is someone posing as acorec because MCI is almost a caricature of acorec… an extreme. But the same behavior would be expected of the real acorec, just having sunk deeper into his illness.
Either way, MCI2424 has serious issues. Even if it is someone acting out their frustrations using a resurrected acorec as an evil twin… that’s even worse and we have a double-dog troll problem with a twist.
Both are unacceptable. And though some might find the whole thing entertaining the rest of us would like to have a forum here. Leave the drama for The Cave, which is what it was setup for. You can pretend you’re anyone you want there.
A highly respected and well-liked, long-time member sent me a PM in June of 2005. Below are excerpts, but I will not post the PM in full or reveal the sender's name because that would be violating a confidence. That's up the the member if they want to be involved or even care about this current issue.
“I am now being trolled, harassed, stalked and threatened by "Micsales", aka "acorec" (banned user name).
“Not only do I ask for your support as a friend, but the trolling/harassment and threats are escalating dramatically, on posts AND PM's, of me by ‘Micsales’.”
It is my impression that as far is this person is concerned it is water under the bridge and he does not wish to reopen it. But as for me, it serves as a starting point in a pattern that goes back over two years spanning different user IDs. How long do you propose we tolerate it, Tim G?
After Micsales was banned, then came “Quantagee” who was also banned. I’m certain there were others (some I suspect yet can’t be completely sure so I don’t list them), but we now have this same troll under the name of MCI2424.
In October 2005 I received this information from the same member via PM:
“MCI2424 is acorec”
But one doesn’t have to have received PMs or be an expert in writing analysis to see for themselves the same language, the same attacks, the same arguments, the same attitude and trolling behavior. But an admission by MCI2424 that he is acorec (Andy Olaska) makes any observations insignificant.
I have always considered the possibility that MCI2424 is someone posing as acorec because MCI is almost a caricature of acorec… an extreme. But the same behavior would be expected of the real acorec, just having sunk deeper into his illness.
Either way, MCI2424 has serious issues. Even if it is someone acting out their frustrations using a resurrected acorec as an evil twin… that’s even worse and we have a double-dog troll problem with a twist.
Both are unacceptable. And though some might find the whole thing entertaining the rest of us would like to have a forum here. Leave the drama for The Cave, which is what it was setup for. You can pretend you’re anyone you want there.
MadAudio
Damned if I do
I was willing to take your word earlier, but that's quite a stack of compelling evidence you've got there.
evm1024
New member
computers are wonderful
Just a few ghosts in the machines memory.
-------------------------------------
http://recforums.prosoundweb.com/index.php/m/248887/0/#msg_248887
acorec
Messages: 86
Registered: February 2005
Member
OK. I hear from the recording crowd that RMG tape is shedding. It is supposed to be because the tape is slit wider than Quantagy and any machine that has run Quantagy tape will have grooving too narrow for RMG tape. I ran many reels of RMG tape through 2 of my 1/2" machines and everything looks fine. Have people here had this shedding problem?
I am curious if the pro machines (with healthy continual maintenence)have these problems.
Anyone?
Thanks in advance.
--------------------------------------------
https://homerecording.com/bbs/showthread.php?t=239460
https://homerecording.com/bbs/showthread.php?t=126249
--------------------------
Members Members Search Search FAQ FAQ Register Register Login Login Home Home
acorec's Profile
Date Registered: Thu, February 03, 2005
Message Count: 86 Messages(s) (0.1 average messages per day)
Show all messages by acorec
Real Name: Andrew Olaska
Status: Member
Last Message: Fri, 01 June 2007 06:48
RMGI
Last Visited: Tue, 12 June 2007 12:09
E-mail: [Click here to e-mail the user]
Gender: Female
Date Of Birth: February 09, 1960
------------------------------------------------------------------
Any doubt that acorec = mci2424 = Andy Olaska = and the list goes on. So respectful on the other bbs and here?
Just a few ghosts in the machines memory.
-------------------------------------
http://recforums.prosoundweb.com/index.php/m/248887/0/#msg_248887
acorec
Messages: 86
Registered: February 2005
Member
OK. I hear from the recording crowd that RMG tape is shedding. It is supposed to be because the tape is slit wider than Quantagy and any machine that has run Quantagy tape will have grooving too narrow for RMG tape. I ran many reels of RMG tape through 2 of my 1/2" machines and everything looks fine. Have people here had this shedding problem?
I am curious if the pro machines (with healthy continual maintenence)have these problems.
Anyone?
Thanks in advance.
--------------------------------------------
https://homerecording.com/bbs/showthread.php?t=239460
https://homerecording.com/bbs/showthread.php?t=126249
--------------------------
Members Members Search Search FAQ FAQ Register Register Login Login Home Home
acorec's Profile
Date Registered: Thu, February 03, 2005
Message Count: 86 Messages(s) (0.1 average messages per day)
Show all messages by acorec
Real Name: Andrew Olaska
Status: Member
Last Message: Fri, 01 June 2007 06:48
RMGI
Last Visited: Tue, 12 June 2007 12:09
E-mail: [Click here to e-mail the user]
Gender: Female
Date Of Birth: February 09, 1960
------------------------------------------------------------------
Any doubt that acorec = mci2424 = Andy Olaska = and the list goes on. So respectful on the other bbs and here?
cjacek
Analogue Enthusiast
What I’ve gleaned from the poll so far is that MCI has 3 to 5 other active user accounts besides MCI2424.
That means he must have spent most if not all of them on "The dude is an angel - he belongs here" part.
Attachments
M
MCI2424
New member
I was willing to take your word earlier, but that's quite a stack of compelling evidence you've got there.
Except, this "evidence" is all 3rd party and absoultely untrue. The one member I had a problem with was just like Beck. He was constantly putting words in people's mouths and bashing (personally attacking) people instead of having a discussion. Beck will not "win" anything here as he has chosen the coward's way out (personal attacks) and if you guys are gonna let him continue to trash me, you probably will be next.
As far as any comments I have made, look at them in context. The "as stupid as it gets" type of line was after the poster came in swinging asking every single question ANSWERED PLAINLY in the fuckin post. He did not even read it, all he wanted was a shitfest.
Beck is an expert at taking everything out of context. and now he has magnified this "MCI2424 ids the fucking devil" BS.
So, people, if I am SO BAD, why is it ONLY Dr. ZEE and Beck that see it. Why "jump on board" with these two shitfest artists?
Good Luck. If you wanna have these two assholes running your board, you will be next.
Here is a perfect thread lead by your 2 heros:
https://homerecording.com/bbs/showthread.php?t=230326
This poor guy was RUN OFF here for asking questions the heroes could not handle.
Enjoy and try to explain it away.
Last edited:
T
The Ghost of FM
Banned
Dr ZEE; said:
The last time I drove through the border and made my declaration to the customs agent that I had nothing in my trunk other then 400 pounds of C-4 and a couple of keys of heroine, I'm pretty sure I was mortal at the time.
I also continued to feel extremely mortal when they decided to disassemble my car into 18,000 pieces and left me naked by the side of the road with a rectal camera probe still stuck up my ass.
Cheers!
SteveM
New member
H
Hi_Flyer
New member
this is ridiculously childish. internet arguments like this are pointless. if some of you spent as much time actually answering the questions of newbs like myself instead of arguing, this forum would be much more informative.
Dr ZEE
Anti-Pro Circles Insider
yeahSteveM said:Oh, The ol' bait and switch thread!
I'm still working on clearing the what's left of minefield, picking up unused grenades and all sorts of improvised ammo.
Dr ZEE
Anti-Pro Circles Insider
M
MCI2424
New member
That means he must have spent most if not all of them on "The dude is an angel - he belongs here" part.
Totally wrong. I have 1 user account. That is it. Go ask Dragon if you don't believe it.
M
MCI2424
New member
Exactly as I posted here. No -one there seems to have an issue. Read my original post. Nothing hidden there. You are fishing.
Exact post word for word:
So, I checked my post at PSW and got many more responses. RMGI has no shedding issues on properly maintained and aligned machines. Unless the 2" stuff is different from the 1/2" stuff (both made from the exact same roll) then the machine's health and headwear is the offender here.
Until I hear a single pro say otherwise, have your heads re-lapped and guides turned.
What is the point of your post please?
How is this for treating a new member here?
https://homerecording.com/bbs/showthread.php?t=230326
Do you approve?
BTW: I am respectful where there is respect to give. You guys are just harassers when someone comes in and talks about things you don't like. You will find out..............sooner or later. Some here already have.
Last edited:
evm1024
New member
But are you talon?
You know when I saw Talon's thread I thought, Oops here is Andy with a new ID out to stir up trouble.
I still don't know if Talon is you or not.
But we are not talking those other folks. So don't shout "Mom, those other kids threw rocks too".
You know when I saw Talon's thread I thought, Oops here is Andy with a new ID out to stir up trouble.
I still don't know if Talon is you or not.
But we are not talking those other folks. So don't shout "Mom, those other kids threw rocks too".
Dr ZEE
Anti-Pro Circles Insider
That's what I am talking about.MCI2424 said:
"I am here not to hear, as there's no one here to listen. I am here to talk."
M
MCI2424
New member
I am not Talon. Period. The whole thing started with my giving advice on equipment I know and Dr. ZEE jumping the gun. Please read the whole thread. That is all I ask. If you can't see what and why it hapenned, then you just never will.
Talon got caught up innocently in Dr. ZEES hatred of the word "pro". "2inch tape" and me. Whatever his problem is, he was awefully rude to this guy.
evm1024
New member
I have
Andy,
I have read the whole thread both then and now. You should take a look as post number 7,9,11 and 13. Good exchange of information and a coming to understanding.
Talon made some offensive comments in post 7 that were not let slide in post number 14. And again I want to point out that I truely thought that You were Talon and were out to stir things up. And so did Dr Zee I expect (but don't speak for him).
I think that Beck summed it up very well in post number 15. Might want to look at post 31 too.
You might want to re-read it again yourself.
Funny how the topic has shifted.....
Andy,
I have read the whole thread both then and now. You should take a look as post number 7,9,11 and 13. Good exchange of information and a coming to understanding.
Talon made some offensive comments in post 7 that were not let slide in post number 14. And again I want to point out that I truely thought that You were Talon and were out to stir things up. And so did Dr Zee I expect (but don't speak for him).
I think that Beck summed it up very well in post number 15. Might want to look at post 31 too.
You might want to re-read it again yourself.
Funny how the topic has shifted.....
Dr ZEE
Anti-Pro Circles Insider
Hey, you, MCI, I really can take allot, but there's a limit somewhere. You are not going to get away with this.MCI2424 said:
NO. That was not how the "whole thing" started. And yes, go and read all the posts in order.
I did not even respond to your "knowldgable advice" (and what an Advice that was!!!!!!!!! Studer is Pro, Tascam is Not. Brilliant!).
I've responded to Daniels' Post. Then Talon made his totally unjust remarkes toward Daniel's replies. And I've responded to that. That was how the "whole thing started". And, no, I was not soo freaking nice to Talon, like Daniel was and always IS! to every freak out there who often rather deserves no piece of dry sh*t on a stick.
***********
And NO! I don't hate word "Pro" , it's just a word.
No I don't hate 2". It's just tape width.
No. I don't hate you. I have no clue who you are.
What I do is this. I respond to the posts I read on this very board. No more, no less than that. And when an individual like yourself creates a username and a password and posts some pathetic mindless spins and twists surrounding word "Pro" and width value of "2" in inches over and over again to the left and to the right on the b-board where word "Pro" has no weight and "2" wide tape" is rather useless - I respond accordingly.
**********
Now let me repete this for you:
Paragraph 1. The Word "Pro" has no weight (read - nobody cares).
Paragraph 2. 2" tape - useless (read - nobody cares).
That's where you are, MCI. In case you have not figured that out yet. That's where you've come to talk. Not to listen.
- Status