DDev
New member
Sounds like you need a trained monkey to strip and tin all those stinking wires. That's like, 1700 wire connections 
My setup is somewhat simpler. I've got 3-48 point patchbays that don't require soldering (toss up; simplicity versus reliability). Of those 3 patchbays, one bay has 36 points used, a second one has 4 points used, and the third plugs a hole in a rack. Of course, this also tells the story that I only have a small handful of outboard components (lets see, a 2-channel preamp, 2 FX processors, a compressor, and a synth module; I also have a small Tascam mixer that I use the 8 direct outs for general purpose preamps). It works, but has it's limitations.
Anyway, sounds like we know what you will be doing for the next (insert number) weeks
Cheers,
Darryl.....
My setup is somewhat simpler. I've got 3-48 point patchbays that don't require soldering (toss up; simplicity versus reliability). Of those 3 patchbays, one bay has 36 points used, a second one has 4 points used, and the third plugs a hole in a rack. Of course, this also tells the story that I only have a small handful of outboard components (lets see, a 2-channel preamp, 2 FX processors, a compressor, and a synth module; I also have a small Tascam mixer that I use the 8 direct outs for general purpose preamps). It works, but has it's limitations.
Anyway, sounds like we know what you will be doing for the next (insert number) weeks
Cheers,
Darryl.....
