mshilarious
Banned
OK, tonight I'm cleaning out my closet. Most of this is surplus cables, but you can have whatever you what for the price of shipping:
Non-cables:
- 16" bodhran, Irish made, with beater, good condition but not too good of a sound. Needs very high humidity to sound decent at all. Hence the low price--FREE! Shipping & handling though is probably $10, may be more to the West Coast.
- OPA4134 opamp, unused, surface mount. I didn't THINK I was buying the surface mount, but what did I know.
- Pioneer TS-693P 6x9 car speaker. A little ruffled but works and sounds fine. A cheap speaker I bought for an experiment; I ended up destroying its twin, but this one suffered no abuse by my hand.
- Pair of Sony TV speakers, 4 cm x 6 cm.
- 120mm case fan, not the low noise kind. Plugs direct into PSU, not mobo.
- Cowbell mounting hardware. I need MORE COWBELL!
- Orphaned AC adaptors: 9.4V 400mA; 3.0V 400mA; 9.0V 300mA
Cables:
- Lots of 6' power cables, 8 to be exact, plus one with a funny connector--looks like a club from a deck of cards. If you know what that's for, it's yours!
- 3 PCI riser cards of various heights, one is on a little 3" cable which is clever. I used to build mini-ITX stuff for fun.
- RCA cables, 2 3' stereo cables, 1 10' stereo cable, all with gold connectors.
- 2 S-Video cables of unknown length as I have never uncoiled them. At least 3'.
- A standard printer cable
- Hosa TS - TS cable, one side right angle. This is not a quality cable, but if you plug it in & don't move it, it should be OK. 6' I think, it's coiled.
- 3 IDE cables
PM or email if you want pictures.
Non-cables:
- 16" bodhran, Irish made, with beater, good condition but not too good of a sound. Needs very high humidity to sound decent at all. Hence the low price--FREE! Shipping & handling though is probably $10, may be more to the West Coast.
- OPA4134 opamp, unused, surface mount. I didn't THINK I was buying the surface mount, but what did I know.
- Pioneer TS-693P 6x9 car speaker. A little ruffled but works and sounds fine. A cheap speaker I bought for an experiment; I ended up destroying its twin, but this one suffered no abuse by my hand.
- Pair of Sony TV speakers, 4 cm x 6 cm.
- 120mm case fan, not the low noise kind. Plugs direct into PSU, not mobo.
- Cowbell mounting hardware. I need MORE COWBELL!
- Orphaned AC adaptors: 9.4V 400mA; 3.0V 400mA; 9.0V 300mA
Cables:
- Lots of 6' power cables, 8 to be exact, plus one with a funny connector--looks like a club from a deck of cards. If you know what that's for, it's yours!
- 3 PCI riser cards of various heights, one is on a little 3" cable which is clever. I used to build mini-ITX stuff for fun.
- RCA cables, 2 3' stereo cables, 1 10' stereo cable, all with gold connectors.
- 2 S-Video cables of unknown length as I have never uncoiled them. At least 3'.
- A standard printer cable
- Hosa TS - TS cable, one side right angle. This is not a quality cable, but if you plug it in & don't move it, it should be OK. 6' I think, it's coiled.
- 3 IDE cables
PM or email if you want pictures.
