For sale

  • Thread starter Thread starter alien
  • Start date Start date
alien

alien

New member
Not recording equipment - I'm still buying that myself. If there are live performers here who need lighting equipment...and not American DJ junk lol...read on.

Lighting Equipment, $1800 for everything listed in this category:



Controller:

NSI Model 6128 controller. 128 scenes, 4 memory banks, 6 chases, audio sync, & case



Dimming:
(2) NSI ND-4600 dimmers. 4 channels each, 600W per channel
(2) Sunn PS-1200 dimmers. 4 channels each, 1200W per channel
(1) Sunn PS-300 dimmer. $ channels, 300W per channel



Fixtures:
(8) Par 46 fixtures. Aluminum. 6 are loaded with 150W 7000 hour bulbs. Two newest have 200W bulbs
(10) Par 56 fixtures. 4 aluminum and 6 steel. All loaded with 300W bulbs.
(2) Strand Lekolite ellipsoidal fixtures. 500W each. Twin lens. 25 to 50 degree coverage.
(1) Par 36 size pinspot ellipsoidal fixture. 250W. Single Lens.
(2) Par 36 ACL bars. 1000W each. Effects Lighting.



Stands/Trussing:

(2) Doughty Engineering crank lifts. 12 feet in height. Double locking. 250 lb capacity each.
(3) Ten foot sections of triangular aluminum truss w/ 1” diameter pipe. Manf by Universal trussing.
(1) 16 foot section of Meteor trussing. 2” diameter pipe.
5) 9 foot aluminum light/speaker stands with T bars

Power:
Dual service Distro box: Circuit Box with a 75' four conductor 6 AWG feeder. Dual sservice at 60A per leg. One 20A and one 30A breaker per leg. Extra breaker in box. Twist lock connectors on box. Cables are twist lock on one end and a quad box on the other.

Misc:
(12) Par 56 raykits. Allows for two pin bulbs to be used vice flood lamps.
XLR data cable…many.
Extension Cords…..many
Gel frames for all fixtures
A gel catalogue (I was very meticulous about keeping this in proper order!)
Mounting bars for fixtures and clamps of assorted sizes.



NOTE: An additional eight (8) Par 56 fixtures are avalaible for an additional $200 if the above is purchased
 
You might want to say what city you're in. This stuff would cost a fortune to ship.
 
Doh!

I'm in Huntsville, AL.

I'm willing to go as far north as Nashville or Atlanta if my worn truck will handle it lol.

I definitely would not even think of trying to ship this stuff out. The truss exceeds UPS & FedEx Ground's limits for lenght/width/girth measurement. Even though all three sections of the Universal Truss bundled together only weighs 32 pounds, they won't take it. So it would have to go freight via Emery or the likes and that runs up into the $'s.
 
That's a pretty good deal. Thankfully, I don't need or want any lighting gear right now.
 
Alien - check your PM. Click on "user CP" to view a PM if you didn't know.

DD
 
Back
Top