G
garbagelarge
New member
maybe this
would this work?
Opcode 4 MIDI INTERFACE SYNCHRONIZER
SPECIFICATIIONS
128 MIDI Channels
8 MIDI INs/OUTs
Read & writes all formats of SMPTE
Converts to MIDI Time Code or direct time lock
Battery backed-up memory
MIDI activity LEDs for each MIDI IN/OUT
2 Peripheral Thru Switches
2 pairs of MIDI INs/OUTs on front panel
Single rack-space
would this work?
Opcode 4 MIDI INTERFACE SYNCHRONIZER
SPECIFICATIIONS
128 MIDI Channels
8 MIDI INs/OUTs
Read & writes all formats of SMPTE
Converts to MIDI Time Code or direct time lock
Battery backed-up memory
MIDI activity LEDs for each MIDI IN/OUT
2 Peripheral Thru Switches
2 pairs of MIDI INs/OUTs on front panel
Single rack-space
bennychico11
...
garbagelarge said:
yes, that should work. I'm assuming it has analog in for SMPTE
You'll need to lay SMPTE time code onto one of the channels on the tape machine though.
The SMPTE of that track will need to be patched into the Sync device which will convert it to MTC for your computer.
phaqu
gone and forgotten
I would rum the SMPTE as the master and let the comp slave to it( if you can). From my experiences, you get a better lock that way.