Search results

Sorry - neglected to mention that I cannot hang mics, due to restrictions on the venue. 2 ME66's and various dynamic cards (SM57 etc ). But purchasing could be an option - I'm always looking to justify new things ;). Anyway, I am intrigued by the 2-pair setup suggested by BigRay. I have to...

So kind of a weird question, but I figured I'd ask it here cause there's some smart peoples here. I am in a position where I have to mic/record basically an entire audience. The goal is for the audience to be able to ask questions to the stage, WITHOUT having to be passed a mic or anything...

I use Line6 exclusively for modelling - got a Flextone II XL for guitar and a BassPODxt for (you guessed it) bass. My advice would be to get a Line6 PODxt over the Behringer - though I haven't personally heard the Behringer, I guarantee Line6 put more time and effort into their modelling than...

Lies! I am full of lies! Even with the clock mode changed, I got the problem again a couple days later. And after like 2 weeks of anger, I found the REAL problem - a Sony DVMC-DA2 that I had hooked up to the front Firewire port of my G5. Since all the Firewire ports (400 + 800) share the same...

I think what you're talking about is the ability, via software, to use the Ins/Outs as inserts. If so, then the routing is done within TotalMix or your native app (Cubase, Logic, etc). Do you have a link to where it specifically talks about inserts with the Fireface?

Ethan, Great to hear. I'm especially concerned about the low frequencies, as I would be using them for sound-for-picture work, as well as music. And I would definitely like to avoid getting a sub if possible. I have heard the "too much bass" shortcoming a lot with the 824's, as stated by...

Does anyone have any experience with Mackie HR624 monitors? I've used 824's and love them (great low end), and the 624's advertise the same sound in a more compact design, but I don't know if I buy that. Anyone with firsthand experience? Edit: Yes, I realize that the published specs have the...

Fixed it - make sure you set the clock to "Master" instead of "Autosync" if you're not syncing to another piece of gear. This doesn't really matter on the PC side, but seems to make all the difference on Mac.

So I just decided to switch my Fireface over to my G5 from my WinXP box. Easy, huh? I thought so too. So I installed the latest drivers, attached the Fireface (it was detected correctly), and flashed the firmware to the latest for Mac (1.83). Everything seemed fine, until I opened up Cubase...

I've got a UB mixer with the same preamps - as said before, not the best in the world, but more than usable, esp if you're on a budget. I've never had any huge complaints about them.

I'm not a minimalist. Customized Ibanez (fitted with switches and a button, 7 different pickup combos) goes into Digitech Whammy pedal, then into Line6 Flextone. Flextone handles most of the tone, and is controlled via floorboard controller. FX loop of Line6 goes through Powerbook, running...

I have no idea what note I'm playing at any given time - I just do it by ear. Guess I'm "not worth a shit." :D

Completely agree with Perdicament - flat quite a bit, but definitely potential, and needs more power in the performance. It almost sounds like she's holding back.

Agreed with apl - tung oil is the way to go. And if you ding it, just sand and oil again, and it's good as new. If the natural finish isn't your thing, Rockler sells a nice tung oil/dye combo. I put a Carvin neck on a Les Paul copy body, made the neck black with the Rockler oil, and it's awesome.

I'll just comment on the Bass issue - if your Ibanez isn't the most amazing $300 bass ever, then I'd say pick up a BassPOD. My feeling is (and true bass guys, correct me if I'm wrong) - you only really wanna go the direct recording route if you have a great bass and a great direct box. Now, I...

Dave, what kind of mixer do you have? Also what kind of laptop? Chances are the previous post is right - you need to convert the 1/4" mono outputs of your mixer to the 1/8" stereo Line In of your laptop. If so, this and two of these are what you'll need to get from Radio Shack - they don't...

I had the opportunity to use a Neumann U87 a few months ago - I am now ruined. /end hijacking of thread, with apologies.

I just remembered - check out Tapco - I have no experience with them myself, but Mix gave their 2.1 monitoring setup a positive review, and as I recall they weren't too pricey. Tapco is also a subsidiary of Mackie.

My .02 on monitors: I like both Genelecs and Mackie 824's, they both sound great. But if you're gonna be doing Hip Hop/R&B, you'll want bass. The Mackies deliver a nice bass - supposedly down to 39Hz. You might also want to consider a dedicated sub, which I believe most people who mix Hip Hop...

The Fireface has more Ins and Outs, more preamps, better preamps and converters (based on nothing but my gut instinct that if anyone beats RME's pres/converters, it won't be Echo), and it's Firewire800. Basically, you get more with the Fireface, but you also pay more, and it doesn't come with...