Recent content by kesterdevine

Yeah...blowing up my computer is definitely not on my to do list ;-) But if that does happen, guess you guys won't be hearing back from me ..doh!

Thanks for responses. I am really just trying to record rehearsals in my jam room to listen back to for reference. Kind of like using my PC as a glorified boombox :-) So it's not like real serious fidelity I'm after - just capturing ideas. I have used the line-in with a TRS-TRS cable to...

Help please! Can I use a cable like this http://www.zzounds.com/a--2676837/item--HOSSTP20 to come out of a mixer's Left and Right main out and into the input on my computer sound card, to record onto a stereo track in Cubase LE?(I would be putting a 1/4 inch to 1/8 inch adapter on the TRS end...

Thanks Ripthorn and dementedchord! The inputs on the AW16G are lo-z so i should be o'k there. Hadn't thought about cutting the cable to length. That's an interesting idea. Might actually try that. Should have some time to record this weekend so i'll see how things go. Thanks again for the help :-)

Thanks for the quick reply, NYMorningstar. The cables I have are 20 feet long, but the distance between the preamp and recorder is only about 5 feet. So am I right to assume that impedance is not an issue in this instance? Is the only potential problem noise from the unbalanced cable? Can I...

Hello good people, I have been sorting through my studio and found a couple of cables I didn't know I had. Not sure why/where I got them, but I'd like to put them to use if possible. I am a bit confused about how why and when to use these particular cables. Here's a link to the type of cable it...

Thanks RawDepth and TexRoadkill for your responses. We have tried your suggestions and the HUMM remains. After doing some more research, it would seem that the Motif keyboards are somewhat infamous for the humming noise when connected to a recording device. Quite a nice/high end piece of gear to...

I am working on a recording with a friend who has a Yamaha Motif ES. We are recording into a TASCAM FW-1082 interface to a PC running Cubase. When plugging the Motif into the interface, raising the input trim knob anywhere above 12 o'clock position creates a significant hum that increases as the...

Just to let you guys know...you can split the signal from one (or both) inputs and send to two separate pieces of gear, with this preamp... pretty cool feature! Thanks again for your responses.

Thanks for input. I will give it a try and report back. Thanks again.

Hey liv_rong, I think maybe this needs further investigation. I actually placed a phone call to tech support at Presonus before buying this unit and they confirmed that it could definitely be used this way. That was one of the factors in me choosing this model. There are two outputs for each...

Yes, that's exactly what I mean - one guitar to input, and two lines out from the back from both outputs. Sorry I wasn't very clear. I want to record both signals - one direct in, and one by micing the amp. Thanks.

Just to be clear, I am not a lawyer and cannot guarantee this info to be correct, but this is how I think it works: You can copyright a group of songs as a collection as long as you are the sole author. You would use the Short Form PA and then a Continuation sheet. You would name the collection...

Hi Everybody. I am hoping you guys can help me with this. I just got a Presonus BlueTube DP mic preamp. Here's what I want to do. I want to plug my guitar into it and split the signal sending one signal directly to my recorder and one signal to my guitar amp. The preamp has balanced/unbalaned...

Thanks for the help everyone. I'll be starting to mix in Cubase soon, so I'll be able to try some of these other suggestions. For now, it's just go for a good clean signal and take it from there... thanks again.