Recent content by guhlenn

Hi there, I recently installed sonar 7 on a new machine, but nonw my MIDI keyboard has some trouble. It might be a pc thing, but i;m sspecting sonar is the issue. anyway, i installed the drivers, but soft synths wont produce sound. I';m very new to MIDI, so feel free to point to obvious...

well, really just a short question. been meaning to do a long overdue update, but well, in fear that i will lose all my project settings... Does sonar 7 allow m,e to use my sonar 3 project files? If not, can i run 3 and 7 simultaneously? Much appreciated, (and did check Sonar's FAQ... ;) ) G

been thinking about this,and as most people over the years went nuts when asked for opinions on digital mixers, I never went that route. So i have an old soundcraft 24 channel beast, and M-audio 1814. Time to upgrade/expand :) I could really help my CPU by using the onboard gates compressors...

Now I figured i could bounce groups of instruments (drums, guitars) to stereo tracks and archive the original tracks. haven;t tried it yet. got scared (literally , sonar was acting a little ehm, strange) it;s a 2x 7200 rpm hardisk and athlon something machine. 32 tracks, about 24 effects...

WHat do you all think. GEnerally all-purpose multi pattern condesnor, but should specifically be able to make male somewhat nasal sound really shine. And which pre-amp? DAV is obvious suspect... ULN-2 also very temptin... used for rock music. thank you:)

Hi there, I'm using sonar 3 (he...) and am wondering whether you guys could help me in a "check this and that and then do your homework" kinda way Is it possible to draw volume changes and panning changes within a track? I guess this could be possible with MIDI, but so far I've only record...

what's the thing with a side chain for a compressor. I read lots of interesting stuff about it, but don;t quite grasp the concept. Mind you, i know what a compressor does. IT's just that i don't get what th side chain function typically is used for? thank you.

Looking at good mic. Will try, but always like opinions. so here goes; sennhieser MD441 beyer M88, m160 AT 4033 will eb used in general, but for ambient and vocals in specific. I'm leaning toqwards the m160. but heard and loved others too. the md441 is actually out of budget, but can be had...

Hi all. I did the search, but ended up in the pic's of women vs political bullshit thread. Thanks, that cost me an hour. but it was a good hour, might i take the oppertunity to thank for the redhead that was compared to maria? If Maria looked like that, then DAMN that Jozef, what an idiot...

windows media player tells me some AIFF code is wrong and just is silent, winamp and other players start to play, but when I skip through the song it the music turns to horrible distortion. Nero wont burn it as wav bacause of "errors". I can convert it to mp3 and then evrything is fine. This...

Hi there, Since the computer forum seems to be silent, i hope you'll let me post here... I can;t seem to get a normal latency using Sonar and the M-audio firewire 1814. The waveprofiler sets it to an astounashing 235 msec! i can get it down to about 50-100 msec, but anywhere near 10 msec...

I'm deciding for a friend what card to purchase. will be used with a soundcraft 200. no ned for mic preamps.. maybe two, so i can do some remote tracking of piano or... Now a budget of 500 is not much i know, but he might pay a little more. I have seen all the usual suspects. quality is mid...

hi all, i can get one of these for pretty cheap but info on the net is very poor. I'm guesing this is the older model of the 200B? Anyway. my question is wheteher this is a decent desk (compared to say mackey VLZ or whatever) and if i understand correctly that i can use the jack inserts as a...

I might get one (350). I can get a layla24 for even less(200). But i like the monitor volume knob (from experience, it is worth something...) and protools. But do i get all the fancy schmancy plug ins and things? I really cannot tell from the website. prices are insane so the plugs and software...

Hi, just wanted to know if anyone could help me repair a MD441 (sennheiser) . The red wire just came off due to bad soldering (an i do mean really bad soldering, i suspect they replaced the old DIN (?) with XLR...), which is easy enough to fix. However, the bass roll-off switch just shut s the...