battleminnow
What's this button do?
I bought this at a local used store. I didn't really use it before the refund time ran out, and now It isn't doing me much good. Here's the signal chain I was using...
SM58
RM804
Ch. 1 of seperate Yamaha powered mixer (I didn't have an amp, OK?)
Live speakers
Some sound was evident, but even at high volume or gain, anything.... all I got was a really distorted sound, very low volume, and a definate hum. One note is that the back of this mixer has the 8 ch. of RCA, and they have a bridge from onme to the other on each channel (I do not understand this, but it is almost certainly factory) and one of the sets has been replaced by a normal rca jumper instead of the little U-shaped metal piece that sits in the others. I have taken this out and tried everything again, but nothing has changed. I haven't ever dealt with older mixers before, let alone recording consoles, so treat me like an idiot if you have to
Any help would really be appreciated.
Thanks,
Pete
SM58
RM804
Ch. 1 of seperate Yamaha powered mixer (I didn't have an amp, OK?)
Live speakers
Some sound was evident, but even at high volume or gain, anything.... all I got was a really distorted sound, very low volume, and a definate hum. One note is that the back of this mixer has the 8 ch. of RCA, and they have a bridge from onme to the other on each channel (I do not understand this, but it is almost certainly factory) and one of the sets has been replaced by a normal rca jumper instead of the little U-shaped metal piece that sits in the others. I have taken this out and tried everything again, but nothing has changed. I haven't ever dealt with older mixers before, let alone recording consoles, so treat me like an idiot if you have to
Any help would really be appreciated.Thanks,
Pete