Jeyan
New member
Hello guys, I have a motu 2408MKIII and a 02R digital mixer in my studio, so far I connected them with Adat light pipes and I had a few problems with the clock sync. So recently I bought a word clock cable and connected it seperately between the mixer and the daw.
My question is which one is the master and which one is the slave. Rigth now I've set the MOTU as master (internal clock) and the digital mixer as slave. It works fine, but usually the device where the analog signals are converted to digital should be the master clock and all the rest receive sync from it right? Any experienced person please clarify this. Thanks in advance.
My question is which one is the master and which one is the slave. Rigth now I've set the MOTU as master (internal clock) and the digital mixer as slave. It works fine, but usually the device where the analog signals are converted to digital should be the master clock and all the rest receive sync from it right? Any experienced person please clarify this. Thanks in advance.