Tascam M-1600 Question

[elmerfunk]

I purchased a M-1600 Tascam board on ebay probably about a year ago knowing that I would end up back in an analog situation. I have a Roland Vs-1880, but I just can't get the drum sounds or guitar sounds that I want. Anyway I am buliding up to either syncing an analog 8 track to the VS or selling it totally in lieu of a MSR-16. Ok...Ok....the question. I really didn't look closely at the board when I bought it. It is a 16 channel version. It doesn't have 1/4" outs for each sub group. It some kind of multi-pin connectors on the back for sub groups and tape returns etc. Where can I get these cables? Are they available from Tascam only? Can I make them? Any help would be appreciated. Thanks

 

[B.C Productions]

They're just d-sub connectors. You can get d-sub to 1/4" snakes at guitar center. they're not real expensive. even the hosa ones sound decent...

 

[jim_highwell]

supply for epaon ,roland ,mimaki of spare parts,ink ect.

Gentlemen:
we write to introduce ourselves as one of the provider from china ,of a wide range of epson mimaki roland for spare parts refill cartridge and decoder solution ,compatiable chip and inks.ect.
To make it clearly understood ,we supply Roland HI-FI spare parts and mimaki JV3,JV4.Epson stylus PRO 7600/7400/7800/4000/4400/4800/9800/9600/10600
Should you be interested in supplying ,we would be more than pleased to enter into business activties with you .
we wait for your reply. email:jim_highwell@hotmail.com

Your truly

 

[elmerfunk]

Hey B.C.,

I found these bad boys. I found some on ebay plus I talked to someone at GC. I appreciate your help. Thought it was gonna cost me a fortune to use this desk. Turns out it won't. Thanks Again.

 

[elmerfunk]

Does anyone know where I can get a manual for the M-1600? I've been looking on ebay and haven't found one yet. Haven't tried Tascam....I always figure it'll cost an arm and a leg. Thanks