evm1024
New member
My Tascam 32 did not playback on the right channel in reproducer or sync mode. Sync would work sometimes. record was OK. I've been looking for a schematic before digging into it too deeply.
The connectors on the "motherboard" for sync was sensitive to touch. Twiste it just right and sync would work. (Execelent I thought!)
Inspection showed that BOTH the right channel sync and reproduce connector pins were cold soldered. A quick touch with my soldering iron and some silver solder and Poof (Orange smoke dissapates) the channel was solid.
I still need a schematic...and the headphone amp has a lot of hiss.
Regards
The connectors on the "motherboard" for sync was sensitive to touch. Twiste it just right and sync would work. (Execelent I thought!)
Inspection showed that BOTH the right channel sync and reproduce connector pins were cold soldered. A quick touch with my soldering iron and some silver solder and Poof (Orange smoke dissapates) the channel was solid.
I still need a schematic...and the headphone amp has a lot of hiss.
Regards