Tascam 2488 Neo output assignments

  • Thread starter Thread starter joefox41
  • Start date Start date
J

joefox41

New member
Greetings all,
I am trying to use different outputs on the back of the 2488 Neo. Send audio from my Motif xs8 through the "stereo outputs" to two seperate inputs on my mixer.... and send vocals through the 2488 to the "regular outputs" to a seperate input on my mixer. My reasoning for this is so that I can use my In ear monitors to hear my vocals separately and be able to turn down the music so it is not being send to the in ear monitors (Shure In Ear Monitor)My mixer allows me to send whatever inputs to the "Monitor output (In Ear Monitor) on the mixer.

Current configuration. Vocal Mic plugged into Voicelive 2 Vocal processor...Output from VL2 to inputs A&B sent to Tracks 1&2 of 2488 Neo. Audio from Yamaha Motif XS8 L/R outputs to Input C&D sent to Track 23/24 Stereo input on 2488. I prefer to use In Ear Monitor from the mixer while vocalist listens to his/her vocals through headphone plugged into 2488. (I like to stay mobile when I work) Can this be done, and if yes.. how do I set up to send only tracks 23/24 through to the "Stereo output" of the 2488 Neo to my mixer? I hope I explained this clearly. Thank you for any of your inout.
 
Output Assignnments

Anyone out there with some helpful information? It certainly will be greatly appreciated
 
The manual says that the Monitor Out jacks, ouputs the signal selected in the top panel monitor section. The Stereo Out Jacks outputs the stereo bus signal.

I have not tried what you are attempting, but I do understand why. I would simply try to run a few lines to your mixer and examine the results. I don't have my mixer anywhere near me at the moment, otherwise I would have to give this a try myself just for the fun of it.
 
Back
Top