mshilarious
Banned
Parts box cleanout time again, even if that price is free, at least pay me for shipping! Here is the list, please email only to music at naiant dot com:
Speaker parts:
4 rubber cabinet feet PartsX #260-774
3 yd cabinet carpet charcoal PartsX #260-765
4 cabinet corners PartsX 260-860
3 PartsX 2" flared port tube kit #268-348, plus 1/2 kit - you can really do 2 speakers per kit, although the front and back flares are a little different
Dayton crossover components:
4 40uF 250V film caps, unused
2 18uF 250V film caps
3 10uF 250V film caps
2 2.5uH iron core inductors
1 12uH iron core inductor
1 0.3uH?? air core inductor (0.3 DCR)
1 unknown air core inductor (0.7 DCR)
Neutrik:
1u patch panel stuffed with Neutrik connectors;4 XLR-M, 4 TRS, 7 XLR-M, some with solder
18" 4 pole Speakon patch cable - or just the connectors, I'll pull them off for you
2 Neutrik 5 pin XLR-f, one chrome one black
D series panel mount connectors:
10 XLR-M
3 TRS
16 TS jacks chassis mount
9 TS miniplug cable connectors (chrome)
5 TS cable connectors (the nice fat ones with chuck & strain relief)
20 Switchcraft right angle TRS plugs SOLD
Misc. components:
6 Hammond 1590S project box, lids painted steel blue--treat it like a primer coat if you like; +1 missing lid (I'm looking for that, it's around)
1/2 roll 42 gauge pickup/trafo wire
10 plastic 9V battery holders solder lugs
8 giant (like 1") black knobs with aluminum face
10 Windtech pistol grip 21mm mic clips
2 Rat Shack 20 assorted LEDs - what can I say, my order was $70 but $75 got me free shipping, so free LEDs!
20 windtech 500 series windscreens, 1/2" ID, fits stuff like a Behri ECM8000
9 Alpha 1K 24mm solder lug pots straight shaft
20 Alpha 10K 25mm sliders
50? Tracon 33nF poly caps
17 TLC555IP DIP-8 timer chips
50? 680uF 25V Nichicon HE electro caps
Speaker parts:
4 rubber cabinet feet PartsX #260-774
3 yd cabinet carpet charcoal PartsX #260-765
4 cabinet corners PartsX 260-860
3 PartsX 2" flared port tube kit #268-348, plus 1/2 kit - you can really do 2 speakers per kit, although the front and back flares are a little different
Dayton crossover components:
4 40uF 250V film caps, unused
2 18uF 250V film caps
3 10uF 250V film caps
2 2.5uH iron core inductors
1 12uH iron core inductor
1 0.3uH?? air core inductor (0.3 DCR)
1 unknown air core inductor (0.7 DCR)
Neutrik:
1u patch panel stuffed with Neutrik connectors;4 XLR-M, 4 TRS, 7 XLR-M, some with solder
18" 4 pole Speakon patch cable - or just the connectors, I'll pull them off for you
2 Neutrik 5 pin XLR-f, one chrome one black
D series panel mount connectors:
10 XLR-M
3 TRS
16 TS jacks chassis mount
9 TS miniplug cable connectors (chrome)
5 TS cable connectors (the nice fat ones with chuck & strain relief)
20 Switchcraft right angle TRS plugs SOLD
Misc. components:
6 Hammond 1590S project box, lids painted steel blue--treat it like a primer coat if you like; +1 missing lid (I'm looking for that, it's around)
1/2 roll 42 gauge pickup/trafo wire
10 plastic 9V battery holders solder lugs
8 giant (like 1") black knobs with aluminum face
10 Windtech pistol grip 21mm mic clips
2 Rat Shack 20 assorted LEDs - what can I say, my order was $70 but $75 got me free shipping, so free LEDs!
20 windtech 500 series windscreens, 1/2" ID, fits stuff like a Behri ECM8000
9 Alpha 1K 24mm solder lug pots straight shaft
20 Alpha 10K 25mm sliders
50? Tracon 33nF poly caps
17 TLC555IP DIP-8 timer chips
50? 680uF 25V Nichicon HE electro caps
Last edited:
