Sound Baffle / Acoustic Panel

  • Thread starter Thread starter rpriggleman
  • Start date Start date
R

rpriggleman

New member
Hey yall here is a DIY that I did myself tonight I used 3/4" pvc pipe a piece of 1/8" paneling and the roxul mineral wool insulation aval. here it is 2" thick w/ the burlap material I am gonna lay a couple tracks to see how well it works in behind a mic.
 

Attachments

  • IMG00035 (Large).webp
    IMG00035 (Large).webp
    19.3 KB · Views: 382
Last edited:
Looks good. How did you attach the paneling etc to the frame if I may ask?

JC
 
That looks nice and cheap, as in inexpensive. Good idea, I might steal it from ya!!

peace.
 
ok I will be making 3 more of these and I will take pics as I progress through the process. I used simple 1" X 2" boards the pvc pieces are 36" joints I mounted the wood to the pvc using 3/8 bolts and nuts. I plan on attacking another one today. So hopefully I will be able to post some pics later this evening or tomorrow. Hope that this helps some of you all.
 
after finishing one today it is a bit heavier because of the wood I used on the back and grant it that most of the wood is stuff I have lying around the garage and basement. I wish I would have used 1 and 1/4" pvc for mine but it will work for now I will be getting 1/8" subfloor material for the backs one day next week when I get a day off from my real job. Here are a few more pics though.
 

Attachments

  • 100_1074.webp
    100_1074.webp
    28.3 KB · Views: 295
  • 100_1076.webp
    100_1076.webp
    54.2 KB · Views: 293
  • 100_1077.webp
    100_1077.webp
    54 KB · Views: 285
  • 100_1079.webp
    100_1079.webp
    26.5 KB · Views: 287
one more pic of both side by side.
 

Attachments

  • 100_1080.webp
    100_1080.webp
    9.8 KB · Views: 293
Last edited:
made a mistake in the material list sorry about that I listed that I used 3/4 " pvc when it is actually 1" pvc
 
TimOBrien said:
Very good.

(Looks a lot like my version that I've been posting here on the board for over a year... I have similarly suggested that you can hang OC703 or rockwool in it.)
http://www.palmcitystudios.com/timobrien/music/soundbooth/simplesoundbooth.html

;-))

3/4" pvc is still fairly flexible. I found 1.25" to be better for self-standing units and can be assembled with no glue, making it collapsable for storage....
Click to expand...

Man, I just caught this today. Great link. Thanks for the instructions! :)
 
You must log in or register to reply here.
Back
Top