recording di with pod x3

  • Thread starter Thread starter dawg711
  • Start date Start date
D

dawg711

New member
ive hooked it all up and it records to my pod x3 settings but i cant get it to record a dry clean channel at the same time any help? ive the pod running through a di box which is connected to my tuner and mackie onyx. the di channel is just a flat line =s
 
What DI box are you using? Does it have 2 inputs/outputs? What about the tuner?
 
hey, i have a behringer ultra g and behringer rack tuner. its set up like so. pod x3 guitar input to the "direct to cab" on the ultra g. then the input goes to the main output on the tuner. and the right and left outs on the pod go to my tl audio ivory 2 compressor which runs to my mackie and the out put to mixer from the ultra g also runs to the mixer and then instrument plugged into the tuner. im getting sounds from the x3 recorded fine just no clean di for some reason any help would be fantistic im a newbie and very puzzled, to me it seems like it should work, im sure its something really simple that im missing.

HELP!!
 
I've tried it before using a A/B Box the signal looks like this:

Guitar -> A/B (or any DI box with two outputs) -> Output 1 POD and Output 2 Direct.

Then set the POD to its own track and the DI to its own track. The result is one POD effected track and one dry DI track. I've never actually used the Dry track, but for some reason I still feel I want to have it around in case I need it.
 
Back
Top