F
Foskalim
New member
Hey guys!
I've just bought this set to start to record some simple stuff: An TASCAM US 122 MK-II, a Shure SM57, a Cubase LE5 & an Asus G75VW
However, I've plugged in everything like the manual.
I've plugged like so:
Shure SM57 ->Right Microphone input-> TASCAM US 122 MK-II -> Asus G75VW using the Cubase LE 5 that comes with the US 122.
I've set the TASCAM on mono.
I've changed the BUS on Cubase to mono.
If I plug some headphones on the US 122, I can perfectly hear the mic...
But... no sound comes off the computer... and Cubase doesn't pick up any sound from the mic.
So, I checked the SOUND on the Control Panel, went to Recording Devices. And it said: Line in - TASCAM US 122. But if I made any sound near the mic, the sound levels didn't change...
So, thats my problem, the computer doesn't pick up any sound from the TASCAM. It recognizes the device, cause I've installed every driver, etc... but it doesn't pick up sound...
Any ideas?
Thanks!
I've just bought this set to start to record some simple stuff: An TASCAM US 122 MK-II, a Shure SM57, a Cubase LE5 & an Asus G75VW
However, I've plugged in everything like the manual.
I've plugged like so:
Shure SM57 ->Right Microphone input-> TASCAM US 122 MK-II -> Asus G75VW using the Cubase LE 5 that comes with the US 122.
I've set the TASCAM on mono.
I've changed the BUS on Cubase to mono.
If I plug some headphones on the US 122, I can perfectly hear the mic...
But... no sound comes off the computer... and Cubase doesn't pick up any sound from the mic.
So, I checked the SOUND on the Control Panel, went to Recording Devices. And it said: Line in - TASCAM US 122. But if I made any sound near the mic, the sound levels didn't change...
So, thats my problem, the computer doesn't pick up any sound from the TASCAM. It recognizes the device, cause I've installed every driver, etc... but it doesn't pick up sound...
Any ideas?
Thanks!