Panning with BR-1180CD

[syl20m]

Hello,
I have a BR-1180CD. I record a track (guitar or mic) and when listening the playback, I can't pan it. I press the Pan button and if I set it to R100 I hear the track on both Left and Right with the volume slightly louder (than the panning set to 0). If I pan it to L100 the sound is like it is only the reverb and the volume is very low. I don't know if it's me or the BR, but it should be something easy to do... any ideas?
Regards,
Syl20m

 

[mjbphotos]

Does it happen no matter what trck you record it on? Have you tried a mic to see if the same happens with it?

 

[syl20m]

I tried a Mic plugged in the XLR input and also tried a guitar. In any ways the panning is problematic. I've recorded with the insert set to Rec-Dry. So during the playback the sound is dry but when panning I got the same as described in my previous post. I'm afraid it's the BR that may be defect, but I still have hopes...

 

[mjbphotos]

Unfortunately, it does sound like its the unit. Boss's minimum repair charge is about $75 if it's past warranty.

 

[syl20m]

Finally, the problem is my headphones connector. I tried another ones and the sound is OK. Sorry for this newbie post!!! If someday someone have the same problem, this post will maybe help!
Thanks
Syl20m