famous beagle
Well-known member
Now, leaving all other settings the same as you had it in your test above (including leaving the L-R assign switch latched on your input channel), connect a line source to the STEREO BUSS IN jacks.
Where do you hear the source?
• Headphones [ X ]YES [ ]NO
• STEREO OUT jacks [ X ]YES [ ]NO
• MONITOR OUT jacks [ X ]YES [ ]NO But, it's again about half the level of the STEREO OUT jacks when the MONITOR/PHONES dial is at about 50%. With that dial at 100%, the signal from the MONITOR OUT jacks is a little louder than the STEREO OUT jacks.
NOW, unlatch the L-R assign switch (so ALL assign switches are in the up/unlatched position).
Where do you hear the source?
• Headphones [ ]YES [ ]NO
• STEREO OUT jacks [ ]YES [ ]NO
• MONITOR OUT jacks [ ]YES [ ]NO
Same results as above
See my embedded reply above.