Tim is correct. .. !!!
Listen to him, he knows what he is talking about. . .Initially, when I posted this thread, I was in the market for some drum mics-- thinking that I needed a mic on every drum to get a good drum sound (cause thats the envireoment that I came from) . . . Especially, since the Nady drum kit is so cheap, and for home recording its just easier to buy a mic kit like that, and be done with it. . .
But, its probably not going to give you as good a sound as a pair of Overhead condensers (like the 603's, or even a one LDC condenser mic-- if you want a mono drum mix) and a kick drum mic (like an ATM Pro25) -- I probably wouldnt use the Pro25 in a professional studio setting, . . However, for the home recording,..its an excelllent mic!
So, I finally broke down and bought some mics to track my drums, and I got some fantastic drum sounds using just 2 drum mics, recording the entire drum kit in mono (I used an MXL-v67G, Condenser -- usually used as a vocal mic -- as a single verhead -- roughly 2 feet above, and slightly behind the drum set -- and an ATM25-Pro on the kick)
I was very impressed with what I got, . .the MXL-v67G added some nice overall fullness to the kit, while the ATM 25Pro, added some good bottom-- Eventually, I would like to try this setup, using an SM-57 as an overhead, and the 25Pro in the kick, . .
I'm now a firm believer, that the actual drum kit has a huge part of the sound that you get from the mics-- I'm using a smaller kit, with thinner single ply heads, 8" 10" 12" toms, and a 18" kick, and those toms just reach out and grab you!!! no bad overtones or unwanted resonance. . The cymbals I'm using are a little dark, and dry, . and that REALLY helps, . especially using a condenser overhead-- But, IMHO since its a LDC rather than a SDC, I think thit helps keep the shinny high end cymbal sound down a bit.
Now, if you wanted to add an additional mic on the snare, try another Pro25, like Tim suggested (especially since they are very cheap) or a you can never go wrong with an SM57 on the snare!
Anyway, this method might not work for everyone, since there are so many variables involved, like room acoustics, drum kit, cymbals, and mixing board. But, it seemed to work well for me! Good luck!