Mounting RNP in Funk Logic Tray

  • Thread starter Thread starter Webb
  • Start date Start date
W

Webb

New member
Dumb question.

I'm having trouble removing the knobs on my RNP to mount it in a Funk Logic tray. I had no trouble popping the RNC knobs off, but it looks like I need a certain size allen wrench to remove those on the RNP. I've tried multiple sizes with no luck. Any advice?
 
Yep, there is a set screw in there. The tray that I bought from Funk Logic came with an allen wrench. If yours didn't, I guess it's time to head to the hardware store.
 
It does have a tiny allen screw holding the knobs on
I had one with my unit.

I don't think it came with the tray....
 
I got my tray off of eBay and it didn't come with an allen wrench. I swear I've tried every size imaginable though. Any idea what size I should look for (besides small)? Guess I could just take the RNP to Home Depot with me and try various ones until I find it.
 
http://www.funklogic.com/retro.htm

it doesnt answer your question but it has a tip for install at the bottom and a phone number for questions.
..................................................................................................
this says
• .050 & 1/16" Allen Wrench Included
but it may just be for mounting screws.

here is the link:
http://www.funklogic.com/FRT-8373.htm
...............................................................................................
the rnc installs on the site all say they just pop off but i cant find specifics on the rnp
http://www.funklogic.com/RN-Chevy.htm
 
Thanks for the link! I must have missed that when I was searching...
 
You must log in or register to reply here.
Back
Top