Herm
Well-known member
I would like to change the burnt out bulbs in my 312b mixer but from the manual I just dont get it on how to get inside of the meter bridge. Could you give me an idea of how you do that?
Thank you
Thank you
T
The Ghost of FM
Banned
Herm,
I've never done that procedure yet myself as all my bulbs, (knock on wood) are still going strong!
I suspect removing the meter bridge on the rear apron where all the jacks are is step one and then unscrewing the meter assembly PCB and from there, they should be pretty accessible.
Good luck!
Cheers!
I've never done that procedure yet myself as all my bulbs, (knock on wood) are still going strong!
I suspect removing the meter bridge on the rear apron where all the jacks are is step one and then unscrewing the meter assembly PCB and from there, they should be pretty accessible.
Good luck!
Cheers!
Herm
Well-known member
Ok thanks. Im down to one bulb that lights. 