alien
New member
This is a heads up to everyone:
In another couple of months, I am going to be selling ALL of my studio equipment. Just don't have the passion for it that I used to. I am still going to write and record my ideas, but just going to record for me from now on. Going to downsize to a consumer grade digital board and a small set of monitors. Got other things in life my wife and I want to focus on (she's the keyboardist of my life hehehe).
I will be selling everything as ONE PACKAGE. At this time, I do not intend on parting any of it out simply because of the royal pain it would be to box and ship everything and because the package price is a steal. If I peiced it out, I'd average over $10K via ebay and craigslist.
Once I have it ready to sell (aka - nothing needs to be re-recorded on the last three songs I am submitting to the mastering studio), I will post here. The price for everything lsited below will be $7500.
This package basically is a studio rig along with a practice rig thown in.
I'll post pics of each item and samples of different genres of music.
Consoles:
Soundtracs Topaz 24/48 Inline Monitoring Console.
Soundtracs Solo Live 24X4 console (will need some pots cleaned. Faders are pop and scratch free. Power on switch was sheered when I bought the console. Always turned it on via the power strip)
Roland Si-24 Control Surface
Recording Interfaces:
Computer: AMD 4200+ Dual Core, 2GB DDR2-800, ATI X1600 dual head video, 120GB OS/Program HDD, 500GB project HDD, 12 channels in / 12 channels out. 20” widescreen LCD monitor. XP pro, Reaper, and Audicty installed (the non-freebie software is not mine to sell)
-M-Audio Delta 1010: 24bit, 96KHz 8 in/8 out interface
-M-Audio Delta 44: 24bit, 96KHz 4 in/4 out interface
1976 Dokorder 1140 Open Face Reel to Reel 4 track
TEAC AD-3 CD & Cassette deck.
Outboard Gear:
-Ensoniq DP/4 Effects Unit (one of the output pot shafts was sheered. I am trying to get a replacement. Been using a small flathead screwdriver in the meantime. Pot still functions, but shaft is broken)
-Two dbx 266XL Compressor/Gate
-dbx 266 Project 1 Compressor/Gate
-dbx 1046 Four Channel Compressor
-Aphex 105 Quad Noise Gate
-Audio Logic MT-44 Quad Noise Gate
-Omnifex DDX 1024 Digital Delay
-Symetrix 450 Line Mixer
-Two Art HD-31 1/3 Octave EQ’s
-AB International Precedent 600 Power Amp
-Crown D-150A Power Amp
-Yamaha Q2031A Dual 31 band EQ
-96 Point ¼” Mil-Spec patch bay
-Gemini PL-9: Nine outlet power filter w/ two pull out lamps w/ dimmer
Speakers:
-Pair of Yamaha NS-10M Studio Monitors
-Renkus Heinz 15” 400W monitor
Microphones:
-Audix D4 Kick Drum Mic
-8 Pc Superlux drum Mic set (Superlux = Audix).
-MXL 990 Condensor w/ Shockmount, dual brace boom, and P-Filter.
-Shure SM-51's
Cables:
-8 channel 25’ snake
-6 channel 15’ snake
-Several XLR mic cables ranging from 50’ to 15’
-Mono, stereo, and insert cables for the patch bay.
-16 channel ¼” TRS snakes for the Delta 1010 to interface to the console
-8 channel ¼” TRS snake for the Delta 44
-Interface cables for the Delta’s
Other:
-32 channel custom built meter bridge with external power supply.
-Studio Desk: Built specifically for the Topaz and associated equipment.
-4’ long power strip
-Surge Supression power strip for the PC
-Samson 4 channel headphone amplifier
-Boss DR-660 drum machine
- Horizon Rackmount 4 channel DI Box
Backline Instruments:
-Charvel Model 4 Guitar
-Ampeg VH-140C Amp head (with spare preamp and output boards)
-Roland GR-1 Guitar Synthesizer
-11 Pin MIDI cable for the GR-1
-Roland GK-3 MIDI Pickup
-Ensoniq SQ-1+ keyboard w/ stand
-7 piece black drum set
-Paiste 22” RUDE ride: Original issue. Logo intact. No dings, cracks, or dents.
-Paiste 14” RUDE hats: Original issue. Logo intact. No dings, cracks, or dents.
-Crate 15” bass amp
-Guitar stand for 3 guitars (side saddle type)
-Musicman 112RD with footswitch. Loaded with original USA tubes.
In another couple of months, I am going to be selling ALL of my studio equipment. Just don't have the passion for it that I used to. I am still going to write and record my ideas, but just going to record for me from now on. Going to downsize to a consumer grade digital board and a small set of monitors. Got other things in life my wife and I want to focus on (she's the keyboardist of my life hehehe).
I will be selling everything as ONE PACKAGE. At this time, I do not intend on parting any of it out simply because of the royal pain it would be to box and ship everything and because the package price is a steal. If I peiced it out, I'd average over $10K via ebay and craigslist.
Once I have it ready to sell (aka - nothing needs to be re-recorded on the last three songs I am submitting to the mastering studio), I will post here. The price for everything lsited below will be $7500.
This package basically is a studio rig along with a practice rig thown in.
I'll post pics of each item and samples of different genres of music.
Consoles:
Soundtracs Topaz 24/48 Inline Monitoring Console.
Soundtracs Solo Live 24X4 console (will need some pots cleaned. Faders are pop and scratch free. Power on switch was sheered when I bought the console. Always turned it on via the power strip)
Roland Si-24 Control Surface
Recording Interfaces:
Computer: AMD 4200+ Dual Core, 2GB DDR2-800, ATI X1600 dual head video, 120GB OS/Program HDD, 500GB project HDD, 12 channels in / 12 channels out. 20” widescreen LCD monitor. XP pro, Reaper, and Audicty installed (the non-freebie software is not mine to sell)
-M-Audio Delta 1010: 24bit, 96KHz 8 in/8 out interface
-M-Audio Delta 44: 24bit, 96KHz 4 in/4 out interface
1976 Dokorder 1140 Open Face Reel to Reel 4 track
TEAC AD-3 CD & Cassette deck.
Outboard Gear:
-Ensoniq DP/4 Effects Unit (one of the output pot shafts was sheered. I am trying to get a replacement. Been using a small flathead screwdriver in the meantime. Pot still functions, but shaft is broken)
-Two dbx 266XL Compressor/Gate
-dbx 266 Project 1 Compressor/Gate
-dbx 1046 Four Channel Compressor
-Aphex 105 Quad Noise Gate
-Audio Logic MT-44 Quad Noise Gate
-Omnifex DDX 1024 Digital Delay
-Symetrix 450 Line Mixer
-Two Art HD-31 1/3 Octave EQ’s
-AB International Precedent 600 Power Amp
-Crown D-150A Power Amp
-Yamaha Q2031A Dual 31 band EQ
-96 Point ¼” Mil-Spec patch bay
-Gemini PL-9: Nine outlet power filter w/ two pull out lamps w/ dimmer
Speakers:
-Pair of Yamaha NS-10M Studio Monitors
-Renkus Heinz 15” 400W monitor
Microphones:
-Audix D4 Kick Drum Mic
-8 Pc Superlux drum Mic set (Superlux = Audix).
-MXL 990 Condensor w/ Shockmount, dual brace boom, and P-Filter.
-Shure SM-51's
Cables:
-8 channel 25’ snake
-6 channel 15’ snake
-Several XLR mic cables ranging from 50’ to 15’
-Mono, stereo, and insert cables for the patch bay.
-16 channel ¼” TRS snakes for the Delta 1010 to interface to the console
-8 channel ¼” TRS snake for the Delta 44
-Interface cables for the Delta’s
Other:
-32 channel custom built meter bridge with external power supply.
-Studio Desk: Built specifically for the Topaz and associated equipment.
-4’ long power strip
-Surge Supression power strip for the PC
-Samson 4 channel headphone amplifier
-Boss DR-660 drum machine
- Horizon Rackmount 4 channel DI Box
Backline Instruments:
-Charvel Model 4 Guitar
-Ampeg VH-140C Amp head (with spare preamp and output boards)
-Roland GR-1 Guitar Synthesizer
-11 Pin MIDI cable for the GR-1
-Roland GK-3 MIDI Pickup
-Ensoniq SQ-1+ keyboard w/ stand
-7 piece black drum set
-Paiste 22” RUDE ride: Original issue. Logo intact. No dings, cracks, or dents.
-Paiste 14” RUDE hats: Original issue. Logo intact. No dings, cracks, or dents.
-Crate 15” bass amp
-Guitar stand for 3 guitars (side saddle type)
-Musicman 112RD with footswitch. Loaded with original USA tubes.
Last edited: