HD24 question

  • Thread starter Thread starter reel2reel
  • Start date Start date
R

reel2reel

New member
Quick question about the HD24....Can you use TS cables on the analog inputs, or does it have to be TRS? If you can use either, would there be a difference in sound quality, function, or anything else?
Thanx
 
Yes you can use them, and depending on the quality and length of the cables you may or may not notice any difference in sound quality.

As a rule of thumb, I try to use Balanced cables wherever I can, to reduce the chances of posible noise.
 
Fishmed_Returns said:
Yes you can use them, and depending on the quality and length of the cables you may or may not notice any difference in sound quality.

As a rule of thumb, I try to use Balanced cables wherever I can, to reduce the chances of posible noise.
Click to expand...

Thanks for the info.
 
If your recorder is going to be just sitting a couple of feet from your mixer and your not going to run a big long cable its a waist to go to balanced inputs and outputs. You are just sending your signal through a bunch of extra electronics to run balanced that you dont need. Balanced is only good for long cable runs. Nothing more
 
You must log in or register to reply here.
Back
Top