DIY digital drumkit in production

  • Thread starter Thread starter GreenDank
  • Start date Start date
G

GreenDank

New member
Part I.

I recently decided to go with a module off Ebay and DIY triggers for drums, instead of a programmable drum machine or computer-based program. Maybe my silly escpades will help people attempting to do DIY digital drums. I know there are several websites about it, but this is even more stripped-down, smaller than the rack-style, better laid out (and many more triggers) than the Yamaha DD line, and probably the cheapest way to go.

Components:
The module is a Yamaha TMX. I obtained 12 piezo speakers (aka triggers) and 12 1/4" jacks from Mouser. The board is a 1' x 2' piece of particle board from Home Depot. The triggers will be glued with epoxy to soup and coffee can lids (the smaller coffee cans not the huge ones). The lids will have a thin layer of a packing-type foam sheet between them and the board, and I picked up bulk mouse pads off ebay to cut up for the tops of the pads (which will be secured with silicone). The metal discs will be screwed into the surface of the board.

The wires from the piezos will go through the board and will connect via extender wires soldered to the jacks. The bodies of the jacks will be under the board, and the inserts will poke out the top of the board along the top edge. There'll be 11 pads on the board (kind of set up like a drum kit), and for now, one kick. Kick is a $5 beater off ebay, which will be fastened to a wood L-shaped piece with another trigger sandwich.

For now: I did a quick test run with two triggers, and it looks like it will work OK. I didn't get false triggers from the adjacent trigger pad like I was afraid of. It is velocity-sensitive too, and very reactive to the touch.

Rough Prices so far (minus shipping, since that varies):
Module: $100
6-pack of 3-foot 1/4" cords (ebay): $15
12 Piezos and 1/4" jacks: about $25
10 mouse pads: $5
Particle Board: $5
Glue and silicon: $8
Screws: $3
Bass pedal: $5
Total: $166
Maybe with shipping: approx. $210

Other:
extension wiring, solder, drill, coffee can lids, foam sheet, 6 more guitar cords: had it already

I'll post pics when done, and if all works out, a test run in which I'm playing the drums in a song.
 
I'm very interested in seeing how this comes off, I wish you the best of luck. I am looking at real low cost electronic drum kits, and the cheapest I've found is the Ion, which is going on ebay for around 215-250$. This would have more triggers and probably sound better for around the same price, with a little loving labor, so I think I'll hold off on that purchase...
 
jesterscourt said:
I'm very interested in seeing how this comes off, I wish you the best of luck. I am looking at real low cost electronic drum kits, and the cheapest I've found is the Ion, which is going on ebay for around 215-250$. This would have more triggers and probably sound better for around the same price, with a little loving labor, so I think I'll hold off on that purchase...
Click to expand...

I actually obtained the ion drum machine portion for a brief stint, not realizing it was just an SR-16. I thought it was a modified SR-16, but the ion trigger brain is a separate unit. I've read bad things about the trigger interface - that it doesn't always send the signals through. The brain of the TMX seems very fast. The Alesis D4 or DM5 are likely an upgrade, and not too much more in price. The ion rack doesn't look like it holds many triggers, you're right, and it looks hella cheapo.

Toughest part is nabbing the module without over-paying!
 
I'll get back to this...
 
Last edited:
Definitely give us a follow-up, Green. Drums are not my main instrument, but I have played a bit for years and have been very pleased with what my measely Yammie dd55 can do. I like its recorded sound much more than a typical drum machine, and I actually enjoy playing it. My ears are always open to improvement, though, so let us see how things look--and sound--if you get the chance.

J.
 
jeffree said:
Definitely give us a follow-up, Green. Drums are not my main instrument, but I have played a bit for years and have been very pleased with what my measely Yammie dd55 can do. I like its recorded sound much more than a typical drum machine, and I actually enjoy playing it. My ears are always open to improvement, though, so let us see how things look--and sound--if you get the chance.

J.
Click to expand...

will do. it's coming along. the caulk worked great for sticking the mousepads to the soupcan lids. lots of soldering to do yet....
 
pictures, pictures, pictures, pictures, pictures, pictures, pictures, pictures, pictures, pictures, pictures, pictures, pictures, pictures, pictures, pictures, pictures, pictures, pictures, pictures, pictures, pictures, pictures, pictures, pictures, pictures, pictures, pictures, pictures, pictures, pictures, pictures, pictures, pictures, pictures, pictures, pictures, pictures, pictures, pictures, pictures, pictures, pictures, pictures, pictures, pictures, pictures, pictures, pictures

please :D
 
pics

here's some pics of the thing in production:

https://i45.photobucket.com/albums/f83/dankerella/P2040028.jpg

https://i45.photobucket.com/albums/f83/dankerella/P2040032.jpg

https://i45.photobucket.com/albums/f83/dankerella/P2040031.jpg

https://i45.photobucket.com/albums/f83/dankerella/P2040037.jpg

https://i45.photobucket.com/albums/f83/dankerella/P2040043.jpg

https://i45.photobucket.com/albums/f83/dankerella/P2040044.jpg

so, the board basically has the following triggers:
snare, hi tom, med tom, low tom, ride, bell, crash 1, crash 2, open hihat, closed hihat, and misc (cowbell, sticks splash, china, etc.)

update:
after connecting 6 of the pads, it seems to work pretty good. I've just been running through pre-sets and haven't messed with the sensitivity options of the unit, but there are some false triggers and some no-triggers. These may be correctable with some fine tuning of the velocity settings. I found that a thin, flat piece of metal (one from an instant cocoa container) works a lot better than a thicker soup or coffee can type that has many ridges.
 
Last edited:
...

The board is complete, and the kick drum trigger unit is almost complete. A little tweaking, and I'll have a soundclip with guitars and bass by this weekend, as well as pics of the final product.

What are typical light drum sticks - 5Bs?
 
I did one of these from plans ont he web a few years ago, same genral idea, triggers cglued to can lids etc, but they were sandwiched into remo practice pads throgh a DM5. Worked well and played enough like real drums for my tastes at the time, but as time went on I started to realize i jsut like playing a real set better. This is still a pretty good way to get something you can play on if you don;t have other options (like an area to play loud acoustic drums).

Good lucK!
 
Looking good there, Green. I'll be very interested to hear your soundclips and see the final pics.

I've got a similar project in the works, myself. Just bought a PM16 ($100 on ebay), and I'm building some Piezo triggered drums out of 8 and 10 inch Remo practice pads. I'm still experimenting with the drum construction (I've studied many different techniques for doing it, but I'm trying to find what works best for me). Then I'm gonna build an ABS rack to mount them all on. When complete, I'll probably have about 400-500 dollars into the project, but hope to have the features, performance and durability of a 1500-2000 dollar set.
 
Just a word of advice, I got the Ion kit a few days ago off ebay (the pedals arrived broke, and there are two trigger inputs dead on the module) and its not that impressive.

The rack isnt that bad once you get it all tight. Something just isnt right tho, there is a midi transmission delay, going into my Terratec 2496 prosumer card.

Ive tweaked them a bit, and took one of the toms and made it a kick drum (with real beater) and it works better.

Im interested in what you have going. Ive got a acoustic set to convert, just not the room for it.
 
CavityCr33p said:
Just a word of advice, I got the Ion kit a few days ago off ebay (the pedals arrived broke, and there are two trigger inputs dead on the module) and its not that impressive.

The rack isnt that bad once you get it all tight. Something just isnt right tho, there is a midi transmission delay, going into my Terratec 2496 prosumer card.

Ive tweaked them a bit, and took one of the toms and made it a kick drum (with real beater) and it works better.

Im interested in what you have going. Ive got a acoustic set to convert, just not the room for it.
Click to expand...

Their midi brain must have some type of flaw. Which sucks because it seemed like they were onto something using an sr-16 for the sounds - I like that unit. Props for the heads up on its downfalls, because I think it's looked tempting to a lot of people (including me).

This is probably common knowledge, but not to a guitarist like me: I just came to the realization this morning that the kick pedal really needs that bounce of a drum head to work well. A beater hitting a solid mass makes for some tough drumming! I may have to play some of the bass drum parts with my sticks!
 
TravisinFlorida said:
grab one of those small remo practice pads to mount on your kick jiggy ma bob thingy

http://www.musiciansfriend.com/product/Drums/Percussion/Accessories?sku=442966

how's the home made board working out so far? any sound clips yet?
Click to expand...

good idea. I think I'll need to incorporate a practice pad like that for the kick.

Board is working pretty good. All triggers work, but I just haven't had any time to learn the module and program what triggers are which.

I hope to have a sound clip tomorrow after I program it...
 
You could also try rigging the kick drum pedal with a spring or an elastic of some sort to provide that extra bounce...

Jason
 
GreenDank said:
good idea. I think I'll need to incorporate a practice pad like that for the kick.

Board is working pretty good. All triggers work, but I just haven't had any time to learn the module and program what triggers are which.

I hope to have a sound clip tomorrow after I program it...
Click to expand...

Try sandwiching the trigger Assembly in several layers of foam.

That way you'll have more foam to lay into, and it should be more like a loose kick head. Then tighten the compression spring on that pedal a little.

That's a killer Tama Kick pedal, by the way. They screwed up big time when they quit making those. Everybody started bying the Camco model because it was about $50 cheaper., but it's not where near as good as the model you have.



Tim
 
You must log in or register to reply here.
Back
Top