Connecting mixer to soundcard help

[knox1324]

Sry didn't know where I should post it.
I just got from a friend a Yamaha MG10/2, and a Juli @ esi soundcard.
I just have no idea how to connect the console to the soundcard, which cables to use.
thank you, Noobie XD

 

[ecc83]

Sry didn't know where I should post it.
I just got from a friend a Yamaha MG10/2, and a Juli @ esi soundcard.
I just have no idea how to connect the console to the soundcard, which cables to use.
thank you, Noobie XD

First off go to: http://www2.yamaha.co.jp/manual/pdf/pa/english/mixers/MG10_2E.pdf
and download the manual for the mixer.
Next Google for the Juli@ site and do the same there. The soundcard is not very common but has a good rep'. Yamaha never made a bad bit of 'tronics EVER IMHO!

Cables: You will need two stereo RCA (phono) to RCA leads. Don't cramp yourself on length but I would not exceed 3 mtr unless absolutely necessary. If the Juli card is setup for RCA you are cool but if setup for jacks and you are not confident in swopping it back buy 4 RCA to jack adaptors. (I always get the Gold ones. Cool and blingy IMO!)

Now, RCA "rec" out of mixer goes to input of card and RCA "CD/TAPE" input goes to output of card.

Assuming the card is installed correctly, driver and suchwhich, you are ready to rock n roll, assuming that is you have a mic to warble at and a headphones to harken unto!

Dave. Err! You also need some recording software! Google for Audacity.

 

[mjbphotos]

Read all the sticky threads at the top of this section of the forum about computer recording before buying anthing other than the advised cables/connectors!