Connecting MAudio 2496 & DMP-3

  • Thread starter Thread starter CudBucket
  • Start date Start date
C

CudBucket

New member
Hi all.

I think I'm going to skip getting a mixer and instead get a DMP-3 dual channel preamp to run into my 2496. My questions are:

1) What kind of 1/4" ended cable to I need? A standard guitar cable? Some kind of signal cable?

2) Also, the DMP-3 has 1/4" output jacks but the 2496 has RCA inputs. I assume I can use any good quality 1/4" to RCA convertor. Correct?

Thanks.

Dave
 
To connect the DMP3 output to the 2496 input, you'll be fine using an unbalanced 1/4"-to-RCA cable.

As for the first question you need to be more specific. What are you going into the DMP3 with? A mic or an instrument?
 
Last edited:
MadAudio said:
To connect the DMP3 output to the 2496 input, you'll be fine using an unbalanced 1/4"-to-RCA cable.

As for the first question you need to be more specific. What are you going into the DMP3 with? A mic or an instrument?
Click to expand...

I'll be mic'ing my cab through the DMP-3. I guess I assumed I'd be using a convertor on some cable to go from the preamp to the card and so that's why I asked about cables.

Thanks.

Dave
 
CudBucket said:
I'll be mic'ing my cab through the DMP-3. I guess I assumed I'd be using a convertor on some cable to go from the preamp to the card and so that's why I asked about cables.

Thanks.

Dave
Click to expand...
You can get by with a guitar cable and an RCA adapter if that's what you have at the moment, yes.
 
You must log in or register to reply here.
Back
Top