Connecting a preamp to my interface?

[JBr33zyMusic]

What would I need to connect this Studio Projects VTB-1 Single-Channel Microphone Preamp w/ Tube Blend to my Alesis multimix 6 usb? Thank you!

 

[Massive Master]

Output to input. Just like anything else. In your case, LINE out to LINE in.

 

[JBr33zyMusic]

Output to input. Just like anything else. In your case, LINE out to LINE in.

I mean, what would I need to do that?

 

[Massive Master]

Whatever YOU need. What are the outputs / what are the inputs / Get those. Probably TRS.

 

[mjbphotos]

The preamp has balanced (TRS) 1/4" and XLR outputs, but the Alesis does not have a balanced 1/4" line input section, so use standard 1/4" TS cables. You can use TRS cables if you have them already, of course.
Don't use XLR to XLR cables as then you will be putting the pre-amped signal into the Alesis preamps.

 

[JBr33zyMusic]

The preamp has balanced (TRS) 1/4" and XLR outputs, but the Alesis does not have a balanced 1/4" line input section, so use standard 1/4" TS cables. You can use TRS cables if you have them already, of course.
Don't use XLR to XLR cables as then you will be putting the pre-amped signal into the Alesis preamps.

So I need one 1/4" TS cable and I will be good?

 

[Massive Master]

That'll do.