aux return
Q, here's what happened.I came out of the aux jack with the trs to a y cord, hooked the two ends of said cord to the left in and out of the nano, turned up the aux send of a channel that had an input signal{tried both an instrument input to channel and then an already recorded track},and got no effect, just the dry sound. Now, according to the manual,the tip of the trs is aux send 1, and the ring is aux send 2. I could see the input signal light on the nano flashing when I turned up the aux send 1 for that channel, but no efx, so I switched the cords to the input and outputof the nano. now I got no signal from aux1.I went to aux2,turned up and got a signal to the nano. So, I think the trs coming out of the board is two independant output signals{aux1and aux2}. I'm still not able to get an effect on anything. please,stop me before I kill again. I appreciate your patience and attention to an obvious newbie schmuck............CALO