Dr ZEE
Anti-Pro Circles Insider
LINK: "NEW" 10 QUANTEGY .25x2500 PC TP REELS - eBay (item 200567115628 end time Jan-26-11 08:38:34 PST)
stock up some "PC TP" industrial supply -
stock up some "PC TP" industrial supply -
Dan! you need to check out some maxell ud 1/4 inch tape. Its the nuts on a 1/4 inch machine. I have been buying it for my 22 series machines and love it. Its not cheap unopened but its nice to know that its not going to go bad like some of the old Ampex does
you can try that "poor dude" method that I did while ago , also I did it for funI bought two cases of the 14" pancakes from the same seller a while back. I just need to figure out a way to spin it down now. Got a 14" reel from sweetbeats but no deck big enough, and no free time to mcgyver some other method. I also got about 20 reels of UD from a friend of mine who doesn't like 7" reels!
nop, it does not look like you didWell Zee, it looks like I actually found some cheaper, but after I already bought 2 cases off ebay.
632 .25 in x 2500’ pancake tray pack [63217611T] : reel deal pro audio .::. keeping the analog alive
you can try that "poor dude" method that I did while ago , also I did it for fun
and I did wind from 10" to 7" , not from 14" , but the same idea.
Place the reel on that board with cup-hub that is typically in the 10" reel box, place next to the machine and level it with the machine's reel tables, path the tape through the tape path and onto take up reel .
I've made short video, it's easier to show
link: http://www.mzentertainment.com/video/10_inch_to_7_inch.wmv
also it may work or may not work too well ...