Vocal Booth Construction help.

  • Thread starter Thread starter Krym
  • Start date Start date
K

Krym

New member
Studio/Booth Construction help!

I really need some help as to what i can do with this room. At the moment i'm looking to get a decent vocals booth kinda thing happening in here ASAP using as little time and money [or maybe just a lil more time if need be (to save money of course)] as possible. Please look at the pictures i have put up especially for this thread here -----> http://www.krym.s5.com/photo.html <---- and either post some sugestions as to what you'd do to overcome the problems i'm facing, or you could email me at kymc@arcom.com.au or krym@krym.s5.com. The sooner i get some help, the sooner i'll be able to get down to murdering this c1.

Thanks a billion,

Krym.
 
Last edited:
Firstly you can seal the joins with a standard polyfiller (comes in tubes and you apply with a squeeze gun, ask your local hardware). The ceiling is in fact the best part as you can fill in between the rafters with insulation and cover with cloth.

could you give us a floorplan??

cheers
John
 
OOPS i forgot to mention.

I have a whole bunch of soundproof curtain stuff ill take some pictures of it and put them up on the website, im not sure exactly what kind it is, but its foamy.

Also thanks heaps John, i will get down to drawing up a flaw plan straight away, how detailed are we talking here though? :D
 
I haven't put the measurements in yet, but are these the ones you would want to know before i either over kill or under kill?
 

Attachments

  • plans1.webp
    plans1.webp
    24.2 KB · Views: 181
Measurments are very much needed. Also lable the views so we know whats what.

All we need is a floorplan and an elevation view showing the angle of the celing and the heigh of the walls.
 
i can work in either Krym - but those yanks only know ft/inches :)

cheers
John
 
John Sayers said:
i can work in either Krym - but those yanks only know ft/inches :)

cheers
John
Click to expand...

My software allows me to flip between either, so I can suffer through your OZ measurements :)
 
Studio plans with measurements [in cm.]

I hope this isn't too confusing.

Thanks again.
 

Attachments

  • studioplans.webp
    studioplans.webp
    35.3 KB · Views: 176
Remember Me?

I get the feeling my thread has been forgotten about. Any help still would be good :).
 
frederic said:


My software allows me to flip between either, so I can suffer through your OZ measurements :)
Click to expand...

What kind of software is that?
Sounds like I could use it too!


KRYM,

That pic is HUGE. It won't even fit on my 20" monitor.

Can you shrink it down so the whole thing can be seen at once?

Bushice
 
You must log in or register to reply here.
Back
Top