Tascam 424 MK3 question

  • Thread starter Thread starter icedout2g420
  • Start date Start date
I

icedout2g420

New member
I have recently purchased a Tascam 424 MK3, i'm rather new in home recording, im only 14,.. but anyways,. i was wondering if there is anyway that I could hook my PortaStudio to an external CD burner,......if anyone knows anything let me know

thanks

Justin a.k.a HK3
 
the right cable should do it. Main Outs to Main Ins? I used to hook my 424 up to the PC. Should be the same principle.
 
I just registered to ask the same question. I have a computer with a burner on it. What would be the compatability problems if any? I have a double rca to a 1/8" input would that work. Also will my mixdown be in stereo or mono.
 
double rca connected to the Tascam plus a 1/8" plug connected to the Line-In of the soundcard should work fine, assuming that is the size of plug the soundcard takes.

If the 1/8" inch plug is a stereo plug and the soundcard Line-In is stereo too the mixdown will be in stereo.
 
Yes, just did it

Just hooked my portaone line outs to a pioneer CD recorder ($186 new yo!) and presto-out comes a CD. Neglible loss of quality.
 
You must log in or register to reply here.
Back
Top