Switching Between Monitors?

  • Thread starter Thread starter Mach5
  • Start date Start date
M

Mach5

New member
Anyone know of some type of A/B switch that I could use to go between two sets of monitors? Something that uses 1/4 or 1/8 connections. I know the Big Knob can do it... but i'd rather not spend that much money..
 
Considering your monitors are the microscope for your sound, do you really want to put a $100 piece of junk there?

That's like buying a Ferrari but then insisting on getting your tires at Wal-mart!
 
ok, then put aside price... is there anything else out there besides the Big Knob? all i need it for is the multiple monitors...
 
Then take a look at that Coleman. Even though it is around $100 it is not junk from what I've heard, Coleman has a good reputation.
 
That unit looks interesting, but I would recommend a switcher that allows for three sets of stereo speakers, and also allows for any combination to be selected at the same time. The reason for this is that if you ever want to add a sub to your setup you can do so with a three way switcher.

In other words, the sub is connected to outputs 3, and 1 and 2 are used to switch between the other two speaker sets. The sub can be punched out, or used in combination with either speaker set.

That's why it's important to have a switcher with three sets of outputs and the ability to patch the speakers in any combination.
 
Mach5 said:
interesting point, Albert. anyone know if the Mackie Big Knob or the Samson C-Control can do this?

also, thanks for all the input everyone.. im still trying to decide.
Click to expand...

Yes, but what of the integrity of the sound?
Has it been altered due to the unit's components?
I saw a writeup on the SM Pro passive switcher, and the reviewer stated that there WAS a smidge of low-end and high-end loss as opposed to NOT going through the unit.
On the new Behringer, which is going for $40 and the Samson, around 100, how are all those functions taking place AND the sound not being affected by inexpensive components??
 
Blue Bear Sound said:
Considering your monitors are the microscope for your sound, do you really want to put a $100 piece of junk there?

That's like buying a Ferrari but then insisting on getting your tires at Wal-mart!
Click to expand...
This is ridiculous!
A switcher is only this...a switch, period.
It doesn't effect the signal path provided the wires used are shielded (if signal level switching) and of sufficient gauge (if passive switching).
Buying a $1k switcher won't improve from a $100 switcher.
Look dude, I could build a lossless switcher in 5 minutes with $15 worth of materials. Don't come up to me and say you need to spend big bucks when the materials used don't matter at all.
The BIG KNOB robs tone (and a lot of it), because it's got ACTIVE circuitry going on. And I guess the other "well known" active switchers rob a lot of tone too.
 
You must log in or register to reply here.
Back
Top