Looking for 4x12 Cab Parts

  • Thread starter Thread starter screamingdeal
  • Start date Start date
S

screamingdeal

New member
Trying a good supplier in the US for the 1/4" stereo plugs used in Marshall 4x12 cabs, i saw a post on here where neve1073lover built his own cab i i would like the same 1/4" jacks he had, wanting to buy vintage 30's for a empty cab i bought, like the marshall and mesa boogie sound. i also like the mesa boogie rectifier cab rear input design but would like a schematic or a supplier for pre wired jacks
 
screamingdeal said:
Trying a good supplier in the US for the 1/4" stereo plugs used in Marshall 4x12 cabs, i saw a post on here where neve1073lover built his own cab i i would like the same 1/4" jacks he had, wanting to buy vintage 30's for a empty cab i bought, like the marshall and mesa boogie sound. i also like the mesa boogie rectifier cab rear input design but would like a schematic or a supplier for pre wired jacks
Click to expand...

Wow, I do not often look into this forum (now into my Harley Sportster), and someone is referring to my posts! :)

The jacks were pretty standard switching DPST stereo sockets (p# PS-0190). I used a pressed back plate that I drilled to suit. All bought from Jaycar in Australia. They are on the web, but most component suppliers will have similar.

I bought the speakers off EBay.
 
So did you use one regular mono jack and one stereo DPST?maybe if you could put up a detailed pic or diagram? that would be awesome!!

i am kinda new to this whole DIY stuff, i was planning on getting a dual rectifier and i know they have two 8 ohm and two 4 ohm outs and one 16ohm out and on the cabs the mono in is 8ohm and the 2 stereo in's are 4ohm. but i cant for the life of me find a wiring diagram to the rectifier cabs and i dont know anyone who owns one.
 
screamingdeal said:
So did you use one regular mono jack and one stereo DPST?maybe if you could put up a detailed pic or diagram? that would be awesome!!

i am kinda new to this whole DIY stuff, i was planning on getting a dual rectifier and i know they have two 8 ohm and two 4 ohm outs and one 16ohm out and on the cabs the mono in is 8ohm and the 2 stereo in's are 4ohm. but i cant for the life of me find a wiring diagram to the rectifier cabs and i dont know anyone who owns one.
Click to expand...

You can use a mono and a stereo or 2 stereos.

I did a lot of doco in my build thread, including how to wire up the speakers.
 
Awesome, thanks!
im now in the process of building my own cab. not slanted though that shit looked difficult i dont have the time for that.
should have a full stack here in a few weeks! thanks for the help again
 
You must log in or register to reply here.
Back
Top