Is this a good deal? MCI jh110 1/4

  • Thread starter Thread starter Talldog
  • Start date Start date
Talldog

Talldog

Pain in the ass
Local on CL.

I have on mid-eighties MCI JH110 1/4" deck for sale. 100% restored, working, aligned and in use now. I can deliver and verify alignment if desired.

Along with the pictures below, I have a video of it working and going through a 20hz-20khz frequency response test in record mode.

I can also provide you with an extensive list of things i did as part of the restoration process, including head adjustments (azimuth & wrap) tensions, resoldering connections- the list goes on and on.

-Chris
 
This is the list of things for the refurb.


Blow out Machine with Air Compressor
Remove Power Supply and Blow out
Clean Machine with 409 top to bottom
Lube Job Female Cinch Jones to Power Supply
Lube Job Female Cinch Jones to Audio Drawers
Resolder Pins on boards in Power Supply
Clean chips/lube job sockets on boards in Power Supply
Check voltages on Power Supply
Verify Fan operation on Power Supply
Resolder Pins on Transport Motherboard
Clean chips/lube job sockets on Transport Motherboard
Clean chips/lube job sockets on Analog Torque Board
Clean chips/lube job sockets on Phase Lock Loop Board
Lube Job female sockets on back of Analog Torque Board
Lube Job female sockets on back of Logic Board
Lube Job female sockets on back of Phase Lock Loop Board
Lube Job female sockets on back of Light Board
Resolder Pins on Audio Motherboard
Clean chips/lube job sockets on Audio Motherboard
Clean chips/lube job sockets on Audio Cards
Lube Job female sockets on Audio Cards
Plug in Power Supply for Transport Only
Verify Transport Operation and set Tensions
Plug in Power Supply for Audio Drawers and load Audio Drawers
Check input/record/reproduce
Troubleshoot
Do rough alignment
Check bias
Check azimuth
Check tensions
Do Final Alignment
 
It sounds as if it is a clean machine. How much is he asking for it?
 
OOPs. Should have put that in. He's asking $800. He will bring it to Cleveland from Nashville himself and make sure it is up to spec.
 
You must log in or register to reply here.
Back
Top