I can't record...out of ideas (part 2)

[adamthemute]

So when everything was working my chain was:

Noise > Shure SM57/58 mics > Behringer Xenyx 1832FX Mixer > M-Audio Audiophile 2496 > Ableton Live 6.0.7

Now I'm not sure what exactly happened, but now Ableton Live doesn't get a signal. I checked the cords, uninstalled/installed the drivers, restarted, and it doesn't work!

I'm thinking it has to do with the PC, or the inputs of the M-Audio soundcard. It can play music from the PC, through the mixer.

What else should I try and check to get this working again?

Thanks

 

[Carter]

Did you look at the software mixer for the audiophile? make sure you are getting a signal there, sounds like a routing issue.

 

[Freudian Slip]

Did you look at the software mixer for the audiophile? make sure you are getting a signal there, sounds like a routing issue.

Ditto, Check the software soundcard mixer. see if the signal is there or not, muted, fader down, etc.

F.S.

 

[vadoom]

You could take a break... You do seem to sound a bit stressed.

 

[adamthemute]

This thing isn't at my house so it makes it kinda harder to work on...

I remeber seeing a signal through the M-Audio software mixer while it was playing, but didn't check while it was recording. If there is no signal, what exactly could be the problem?

Thanks!

 

[Freudian Slip]

Wrong input selected in Live? That's usually what makes me cuss after what I thought was a great take.

Where are you binging the signal out of the board at?

Make sure nothing is solo'd etc.


F.S.